Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: atomicareprise on December 19, 2009, 10:57:07 PM

Title: headset jack soldering ponts..
Post by: atomicareprise on December 19, 2009, 10:57:07 PM

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.solware.co.uk%2F2005-images%2Fsonyericsson-mps-70-speakers-black.gif&hash=abcc409f16e96be392afcac3a13bbdf29ecd62ef)

i want to do sound mod using this amp...

i've seen some tut on am but i'm confused where to solder on the back of the wifi board...

all i know is that this runs on 3.6v...other than that i have no clue at all...

i just need some reference where to solder on the wifi board...thanks..

---

Post Merge: December 20, 2009, 03:59:58 AM

---

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi271.photobucket.com%2Falbums%2Fjj153%2Fatomicareprise%2FPSP-internet-card.jpg&hash=2e8e563618be86e239b5933006885a6d13011913)

Title: Re: headset jack soldering ponts..
Post by: SmaRkieS on December 20, 2009, 08:07:32 PM

i will number that from top to bottom 1-2-3-4

pin 1 and 2 is the negative, if you insert a jack the 1 and 2 will disconnect and it will play the music to the headphone.

if you remove the jack the pin 1 and 2 is connected the sound will play to the psp.

pic 3 and 4 is the left and right.
 

Title: Re: headset jack soldering ponts..
Post by: atomicareprise on December 20, 2009, 09:01:57 PM

thanks kabayan..