Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: ninjamonkey on December 23, 2009, 09:45:05 PM
-
Hey guys I have a question
Say I wanted to relocate the d-pad buttons and x,[],^,0 buttons. How would I go about doing so? I though either soldering wires to the pins on the zif connector to a tact switch or something or scratching the contact to expose the copper circuits on the films and solder to them.
-
where would you be relocating them to?
-
same place but not a close as the are currently on a psp. See I want to make a DS looking PSP. For this I plan on using a PSP slim and to make space for the keyboard, I need to make the case bigger in height. By doing so this make the button contact too low for them to be registered when they are hit. So I need to find a way around this, and I though of relocating them.
-
Ah fair enough. Yeah, using tact switches would work
For the connections you'd wanna try and solder to the zif connector
-
Alright. Thanks for the help. Got another question. You think if I linked up say 3 or 4 slim batteries, I would make an extend life battery or would it not work that way?
-
As long as you wired them in parallel and kept the PCM boards with them, it should work.
-
Couldn't I just take the lithium part of the battery and wire them in parallel to one PCM board?