Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP (3000) => Topic started by: bveals on December 31, 2009, 02:17:21 PM

Title: help i don't understand
Post by: bveals on December 31, 2009, 02:17:21 PM
 :help:
i don't know what could be messed up i have a 3000 that sometimes it will cut on and then
sometimes it wont. then the screen will cut off while t is on for no reason but you can still hear them
i think it might be that the screen back light is messing up.
what do you all think
any help will be good
 :faint:
Title: Re: help i don't understand
Post by: loboplayero on March 02, 2010, 07:46:01 PM
ok there may b 2 problems ur lcd backlight or ur lcd fuse may b lose or going dead if u have another xtra psp u can try switching to make sure is not ur backlight if u try in another psp n it does the same problem so is ur backlight on screen try this if u need more help fell free to hit me up on my box  :hifive:
Title: Re: help i don't understand
Post by: terriquez94 on September 02, 2013, 10:27:24 AM
Make sure your ribbon cables are connected nice and firmly.
Title: Re: help i don't understand
Post by: The End of A Heartache on September 02, 2013, 12:50:26 PM
Having the same issue as bveals on my nephew psp 3000.

 I assumed it was the LCD so I went and so I got a replacement on ebay and after a install and some playing around on his spiderman game the screen went blank. I have to hibernate and then restart his psp for the screen to come back.

If it was a lose backlight fuse where on the PCB is it so I can add some solder hopefully that might fix the loose problem or might need to replace it as lobo had said.
SimplePortal 2.3.5 © 2008-2012, SimplePortal