Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: RROD on January 03, 2010, 10:03:04 AM
-
dose anyone have pictures of the circuit board of this controller , ive looked all over the internet and all i could find it a really poor quality video on youtube of a dissasembly , and if its no trouble could someone tell me the detentions of the board
thanks
Post Merge: January 04, 2010, 03:52:36 PM
sorry but i really need to no this
would highly appreciate it if someone could measure a mother board of there mad catz controller if they have one
thanks.
-
nope sorry havent seen it nor is it in the archives...
still waiting on the gun mod though, what happened?
-
this is why i need the measurements lol need to see if it will fit in the magazine because it would be perfect
you see the d-pad is a extra piece of circuit board screwed about 1cm above the actual mother board and connected with ribbon cable , so i can just extend that ribbon cable instead of using push buttons and soldering to the trace wich ive :censored: up 2 controllers trying to do , and the start and back buttons are also tac push buttons so thats 7 less traces i have to scratch down to the copper and solder to :tup:
once i found out measurements i will buy a madcatz controller and try finish it , just need a desoldering pump and some more hot glue sticks
ive attached a photo of the controller if that will jog your memory
if no - thanks for having a look matt.