Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: F4thAcE on January 04, 2010, 06:16:23 PM
-
okay so at school today a friend of mine told me that his xbox will read NO discs. the disc will spinup he says but then stop spinning abruptly, then he says it tells him that the disc unreadable. so does anyone know about what is happening to it he says he has never gotten the RROD, so anyways hes giving it to me tomorrow to work on (im the only person in my school with electrical knowledge :D more modding jobs for me) if anyone has an idea. please tell me so i will have an idea for tomorrow.
Thanks in advance :tup:
-
Bad laser...possibly. That would be my guess
-
I'm gonna have to go with GREAM on this. Try cleaning the laser and making sure everything is set right. If that doesn't work, try a new laser.
-
so... i got the xbox dismantled, everything looks fine. the 360 is a Jasper, (pretty sure ().()) with a Benq, and i guess the error is known as the Open Tray Error, (wonder why they named it that :D) so... anyone know of a tut on how to fix it? or do i need to buy an replacement laser, or just scrap the drive and buy a new one?
-
That's not the open tray error if it says the disk is unreadable. What's happening is it's attempting to read the disk but it's just unable to. Definitely try a new laser first (that's what I'd do).
-
well he told me wrong when i talked to him or i remembered wrong but somebody was wrong. anyway, it spins and stops abruptly and starts spinning again and stops and does that a few more times then it just stops and goes to open tray i have the xbox with me atm it doesn't say that it is unreadable just open tray :\
-
Personally, I've never had experience with that before. I'd take the easy way out and just get a new drive. You can normally find one on ebay for around $20-30.
To make it easier on yourself, considering I don't think you'd have experience flashing a drive, make sure you get the same drive that's currently in the 360 and when you replace it, take the drive apart and swap the drive board (the circuit board in the drive) on the old one in place of the one that's in the new one.
This will give you a new drive while keeping the DVD key on it so that you don't have to flash it.
If you're still having problems after doing that, though, then you'll need to put the boards back in their respective drives and copy the DVD Key off of the old drive and flash it onto the new drive so that you'll be able to play 360 games still.
-
hmm okay i will tell him that because i can't find any help on google either thanks psp ;)
-
the lazer is bad pspkicks is spot on.
there is a small chance you can adjust the sensitivity of the lazer and get it to work, but not likely
-
Ah. Didn't realize a bad laser caused his new problems as well. Good to know.