Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: terabitez on January 06, 2010, 04:18:36 PM
-
Okay I planned to buy a XCM controller and hook up the LED's, but I came across IntensaFIRE and just recently saw that you had to relocate something or another....but I don't get it...since I've never even opened my controller....so does anyone know how to do it? And if so could you please explain it to me?
Thanks
-
Here you go, in depth discussion on Intensafire and XCM compatibility and the linkage is in-house...
Topic: Intensafire + xcm lighted shell =? (https://www.acidmods.com/forum/index.php?topic=33049.0)
-
yeah i read that already...actually i have it bookmarked lol.. i still don't get what to do though :(
THX for replying too :)
-
it seems as though everything should work just fine if you hook both kits up to the recommended points in the instructions for both the intensafire and the xcm. it looks like the recommended method is to install the intensafire and solder it in place instead of using the conductive glue that comes with it, and then soldering the wires for the xcm to it's recommended points over the top of the intensafire kit (since apparently they use some of the same points).
-
if u plan on doing both on 1 controller use solder preferably silver/tin solder and don't touch the iron on too long or u will damage the intensafire but ya use solder for both and use the recommended method for both :) hope this helps