Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: MadOrange on January 11, 2010, 01:37:51 AM

Title: pobo led problem
Post by: MadOrange on January 11, 2010, 01:37:51 AM

well the problem is that the led seem busted or no current running

i tried the l/r led mod, after that the leds died...
any solutions?

Title: Re: pobo led problem
Post by: pigoesfar on January 11, 2010, 10:01:13 AM

1. make sure the + and - are right.
2. make sure that the power source you are using is correct.  not too low, not too high.
3. if it is too high, make sure you are using the correct resistor.
4. make sure that you didn't melt the entire led while soldering it.