Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => Topic started by: atomicareprise on February 11, 2010, 09:34:13 PM

Title: -conceptl-dual nub using stock phat pcb board
Post by: atomicareprise on February 11, 2010, 09:34:13 PM

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi271.photobucket.com%2Falbums%2Fjj153%2Fatomicareprise%2FUntitled1.jpg&hash=5b92570ab6487e2ff72963b5cf609d1a30c3dd4e)

can some try this one out and see if this thing will work..

its a dual nub using the stock analog pcb..

the white part on the image is where you cut the traces..the red

part are the traces where to solder..notice the triangle and the x has

no traces right?what you will do is poke a hole on it like wetfusion

does and wired it to the pobo points..notice that the square circle

and the ground has traces and be easily solder...hope someone can

check if this will work..i'm out of phat pcb board now so i cant really

try this one out..

Title: Re: -conceptl-dual nub using stock phat pcb board
Post by: cinki on October 06, 2010, 04:26:25 AM

how about this board
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2F3.bp.blogspot.com%2F_gTmkTHv6YaM%2FTKGr2vnyUYI%2FAAAAAAAABK8%2F1bixRyXnuYw%2Fs1600%2F240920101663.jpg&hash=9f7d2256ebd6a189cad329be5633d6d65cc5873e)