Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Xbox 360 Soft mods / JTAG support => Topic started by: toadzilla on March 17, 2010, 07:09:49 PM
-
which ones better guys
-
For what.................
-
moding gta4 tbogt
-
Uh. Explain to me how you mod it and I'll tell you which would be better...
I'm thinking that, since it's not a permanent setup, then hot swap (you mean temp/connectors?) would be better.
-
changing the common.rfp and put like flying cars and stuff
-
I said how..
Sounds like you're just modding the ISO of it. In that case, you're not wiring ANYTHING....
-
i mean wire as in the hard drive transfer thingy
-
Hot swap. Just buy the cable! All you do is connect the hdd to the cable and the cable to a usb port.
There is NO wiring needed...
You can buy a cable for like $5 on ebay. Either way, there's no wiring involved for any of this...
-
kk cause i wanna make my bogt modded were i can fly and all that and i was wondering if it would be better to do it though the drive transfer wire or do hot swap cause if its easier using the hard drive wire i got it coming in the mail if not then ill just have to go buy dvd dl cds and figure out how to do it
-
I have no clue what you're talking about anymore. Seriously.
Just use the transfer cable.
-
http://www.se7ensins.com/forums/topic/171830-my-final-common-hopefully-aka-42-official-release/ (http://www.se7ensins.com/forums/topic/171830-my-final-common-hopefully-aka-42-official-release/) this mod for the ballad of gay tony would it better to hotswap or usb transfer wire( ban wise)
-
Ban wise? If it's modded ISOs then you have a flashed drive which means no matter what you'll be banned. If you're modding GAME SAVES/PROFILES then I don't know. You're too confusing.
-
What Is This For Ps3
-
360
-
you cannot common.rpf mod using the transfer cable,only hotswaps
-
you cannot common.rpf mod using the transfer cable,only hotswaps
agreed
-
OH. Sorry about that. =/
-
so you gotta use the hotswap dam thats gonna be a :censored:
Post Merge: March 18, 2010, 05:00:31 PM
any one knwo the easiest way to do it and do i really need to use a dvddl
-
yes you need DVD-DLs, and the absolute easiest way is to take the xbox apart and take the driver cover off and take the spindle out of the drive cover. But there is also a manual eject hold under the faceplate that you use a straightened out out paper clip (or something similar) to pop the drive open