Acidmods
AcidMods Resources ----- ( These are helpful tools for modding ) => Electronics Projects => Topic started by: Demonboy on March 21, 2010, 02:31:28 PM
-
hey sry bout not doin this yesterday FOOKz... had to tlk with my new girl lol...
ok so in this project im goin to be making a double barrel coil gun w/ 3 or 6 capacitor banks consisting of 4 flash capacitors.... it depends on how many i can get... the reason for the odd number of capacitors is the 3rd bank is going to the 2 projectiles being shot.... my bro really ticked me off... this is how u say uhmm payback.... he took my tattoo gun and put some green ink and put 4 dots on my arm while i was sleepin lol
so ima return the favor
-
This isn't how you "return the favor". You don't understand how dangerous a coil gun can be.
How old are you? You seem like you're just a 15 year old kid wanting payback. This isn't the way to do it.
No offense. You need to understand what the hell you're getting yourself into before :censored:ing around with coil guns. You can kill yourself.
-
lol it has other purposes too... maybe just used to threten him.... idk yet... i have to get these dots ccovered now.... prolly gonna do tht sometime in the next month or so.... but i also need to make 1 to show a buddy of mine i can... he doesnt belive tht i can make 1 xD i told him i could...... sooo, we made a bet $50 each... i make it i get 50 from him i try and i fail he gets 50 from me.... we gave our $ to our good friend and i have 3 weeeks to pull it off
Post Merge: March 21, 2010, 02:47:20 PM
and i understand how dangerouse they are lol... ive had to take some bogous hunting class to get a licence to carry my gun... we were told alll the rules and crap about guns... a coil gun ma be electronic but its a gun none the less... besides i just threw my snake in his room while he was sleepin.... hes sooo afraid of it haha
-
Coil gun's rate of fire is calculated by:
- Width of magnet wire
- current input
- voltage speed of flux
- binding of wire
- efficiency % of windings
- Magnetic properties of projectile
Even if you have a high powered Capacitor discharge circuit, it wouldn't hurt any more than an airsoft rifle.
But its more electrically dangerous than anything out there.
You need:
- 26 gauge enamel coated magnet wire
- capacitors above the rating 4,700uF
- 2 relays
- 2 normally open push button switches
- a high current power suppy
- a few rare earth magnet rods
- some 8 gauge wire
- solder and soldering iron
- something to wrap your coil around
I will build one with you and i'll post pics here too.
I have built a RailGun Already, more powerful than a coil gun but it takes more skill to make.
-
lol i wanna make a rail gun but i couldnt find any decent tuts.... my skills lie withing trees going BOOM!! im good at doing tht lol... but cant tlk bout tht here
-
No Rail Gun. Just No. If word gets out that acidmods users posts rail gun tuts the US Navy might get on our ass.
PLUS its a lot of physics and math to figure stuff out, im the kind of guy that only tells people how to do something if they are willing to learn, i can tell your not ready for a railgun, its too expensive, capacitors $250 each; 5 capacitors.
I will help you with your coilgun, however start off small scale to get the general idea how it works.
-
ok lol.... and im always willing to learn y do u think i got the cookbook? its got so many cool things and projects
-
Could you make a ball bearing railgun?
-
idk but i have a crap load of those cause i work at a dealership detailing cars and the mechanics always give me bearings... where theyre from idk but i use them to hit cans w/ my sling shot... although a bering gun would be alot more fun
-
Coil. Gun. Sniper.
-
They have to be copper plated steel ball bearings to special specifications to be shot from a railgun. I'm not going to disclose.
Dont use galvanized steel ball bearings the gas can kill you. :D
-
Coilguns are dangerous, then. FookZ almighty says nay.
I'd rather not kill myself.
-
haha ok... well fookz i wanna make like a small coil gun not very big but ya... i can go get basic supplies from radi shack in a little bit then the capacitors ill get from cameras
-
You need more than a few capacitors to make a really good one, but if you insist in making one out of a disposable camera then be my guest.
Railguns are dangerous because:
- 4x power of coil gun
- nearly illegal in the USA
- high current low voltage
- galvanized steel can kill you when electricity is passed through it because of noxious Zinc Gas
- components are expensive
- capacitors can explode
- step-up power supplies nedded; like my DC arc welder V2
Coilguns are dangerous because:
- You can poke an eye out
- electric shock
- wires get hot
- capacitors can explode
-
lol FOOKz its just for a bet... its how u say a scale model i think... ima make a rifle sized one after i understand the mini 1's concept lol
-
im making one right now.
i got the coil winded on a pen, and now im rigging this up to my DC welder as a high voltage power supply.
this is gonna be cool. but i hope the EMP wont kill my computer like last time.
-
lol can u make something tht can shoot a emp, but is portabe?
-
yep lol
-
do u have a messenger? outside of AM?
-
Does it kill kill the pc or just disable it? Are we talking burnt out?
( ps you can really tell when thf mods and admins aren't online)
Post Merge: March 21, 2010, 04:28:51 PM
Skype Group chat! Let's go!
-
it mrders it oon a super tiny level lol... desnt it fry something?
-
It sends out RF at 500mA RMS above the frequency of a microwave; your nuts will fry, your computer will fry, you won't be able to have kids, and circuit breakers may trip if it amp rating exceeds 70.0% the breaker's limit.
If the EMP isn't any more powerful than 100mA then your OK. Most unwanted EMPs every day are rated at 10mA RMS at 410KHz.
A 100mA EMP is hard to make. Nuke EMPs are 10 AMPs at low microwave level freq. usually around 16.6GHz
-
lol fookz ur right u are dangerous xD
-
The military are about to sendfookz an email telling him to get in their labs.
-
I Know Fookz Is Really smart,
he could make some money :greedy:
-
lol the military can go suck mah balls. im a private contracted engineer bro. I smoke too much weed i wont be able to pass the piss test.
-
lol,
-
haha... tht some funny :censored:... im readin up on my "cooking" skills
-
haha... tht some funny :censored:... im readin up on my "cooking" skills
Wonder What It Could Be ;)
-
do u have skype?
-
Who Me, No,
Im To Poor I Got Skope, lol
-
lol
-
You keep talking about the cookbook and I'll have you deported (or warned, since I can't actually deport you).
-
You keep talking about the cookbook and I'll have you deported (or warned, since I can't actually deport you).
im lucky then lol
-
Don't be so :censored:y.
-
OK people Relax. This topic is about a coilgun. Not how Chef Boyardee makes his instant meals.
-
ok srry,
so hows it coming, the build
-
lol for all u know kicks its a vegie cookbook xD i havent droped any names xD
-
Working on the High Amperage Triggering mechanism. also known as a toggle switch pulled from a power wheels.
-
lol for all u know kicks its a vegie cookbook xD i havent droped any names xD
Shut up already.
-
Working on the High Amperage Triggering mechanism. also known as a toggle switch pulled from a power wheels.
cool, from a power wheels, ima go look for 1 now
-
damn kicks were just playin... what crawled up ur ass?
-
im using spare parts man. so this thing won't look pretty.
computer power supply case
toggle on/off switch to charge
power wheels switch
capacitor from a ham radio
some fairly new diodes about a year old
some 10 gauge house wire
I made sure the spare parts' power ratings are estimated 4 times over the power specification.
-
damn kicks were just playin... what crawled up ur ass?
Nothing.
So I'm also going to make one out of a spare Nerf gun...lol
-
im making mine out of my resident evil wii blaster xD
-
Video Of a Coilgun in Action:
Coil Gun Testing (http://www.youtube.com/watch?v=eTA8zq-sI7w#normal)
I need a coil with more windings to propel that needle faster out of the tube.
-
video is still not working
-
Relax, let the video render. Its not done processing.
-
i would also be interested in building 1 of these
-
im working on a more powerful coil plus im adding more capacitors.
Wait for the grand finale.
Post Merge: March 22, 2010, 07:00:17 PM
w00t video update bro
Coil Gun Test 3 (http://www.youtube.com/watch?v=yFNjb46FOP4#normal)