Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP Phat (1000) => PSP's => Pandora's Battery => Topic started by: CheeZ! on March 25, 2010, 02:06:27 PM

Title: Making A Pandora's Battery Without Soldering
Post by: CheeZ! on March 25, 2010, 02:06:27 PM

Hey guys,

  I want to mod my Psp Phat(1001) using the Pandora's Battery. But the think is I can't making one because I have no soldering skills what so ever and I don't have a modded Psp that can mod a battery. So I was wondering if you can just remove the pin in the battery by just lifting it off with a flat head screw driver or something. Any help is appreciated.

Thanks In Advance

-CheeZ!

P.S. Please don't suggest buying one from somewhere because I don't want to and none of my friends has a Pandora's Battery.

Title: Re: Making A Pandora's Battery Without Soldering
Post by: loboplayero on March 25, 2010, 04:36:54 PM

nah bro don't mess with the pin use pandora tool under 5min u b done is fast simple and easy.

Title: Re: Making A Pandora's Battery Without Soldering
Post by: SN!P3R on March 25, 2010, 06:46:19 PM

He doesn't have modded PSP to use that...

All you need to do is lift the pin, install CFW, then lower the pin so the battery goes back to normal. I've seen YouTube visa where people put in a piece of grahite to get the pin to connect again.

Title: Re: Making A Pandora's Battery Without Soldering
Post by: CheeZ! on March 26, 2010, 12:45:32 PM

Thanks SN!P3R i may be getting a new battery so I'll just lift the pin off on my current battery thanks.

Title: Re: Making A Pandora's Battery Without Soldering
Post by: SN!P3R on March 29, 2010, 07:22:11 AM

your welcome