Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: bradleyh on April 17, 2010, 11:08:13 AM

Title: Player indicator smd leads?
Post by: bradleyh on April 17, 2010, 11:08:13 AM

i accidently ripped my 3rd player anode off of my controller with soldering wick, can anyone post a pic with any indication of where i can solder a wire so i dont have to scrape my pcb off?

Title: Re: Player indicator smd leads?
Post by: FOOKz™ on April 18, 2010, 09:37:13 AM

Your going to have to scrape the trace to solder that back on. Just solder a wire to the scraped trace and solder the LED to that wire.

Title: Re: Player indicator smd leads?
Post by: Ghost In Black on April 20, 2010, 01:44:25 PM

Just do what FOOKZ said- there's a little line (the trace) that goes from the LED. You're going to very carefully scrape the plastic off the top of that line and solder a wire to the trace, which you will then solder to the correct side of the LED

Title: Re: Player indicator smd leads?
Post by: bradleyh on April 30, 2010, 06:17:15 PM

i know all this, but theyre are 4 leads. which?

Title: Re: Player indicator smd leads?
Post by: tooandrew on April 30, 2010, 11:08:51 PM

the trace that goes to the led you're trying to fix...

Title: Re: Player indicator smd leads?
Post by: bradleyh on May 02, 2010, 11:47:06 AM

i know haha. open it up and look, theres like 4 right next to the smd and i cant tell which goes where

Title: Re: Player indicator smd leads?
Post by: tooandrew on May 02, 2010, 11:59:59 AM

is it a cg controller or a matrix? tell me and ill take a pic and point it out

Title: Re: Player indicator smd leads?
Post by: bradleyh on May 03, 2010, 01:02:20 PM

matrix. and if i got the names mixed up its the one with the "silver pill" on the front.

Title: Re: Player indicator smd leads?
Post by: laxboy on May 03, 2010, 01:12:30 PM

thats a matrix