Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: atomicareprise on April 22, 2010, 12:20:12 AM

Title: lcd pressure problem
Post by: atomicareprise on April 22, 2010, 12:20:12 AM

my lcd is acting up...

everytime i apply some pressure on the lower left

side of my psp my screen starts fading to white

then to all black...

i can't fully close my psp coz of this..

also when i push my home button this happens..

my analog now drifts that's why i hardwire it..

can anyone can help me out??

Title: Re: lcd pressure problem
Post by: Modded Matt on April 22, 2010, 04:23:31 AM

thats what happens when you apply pressaure to lcd screens. the screen is not seated correctly, build up of wires or something behind the screen is holding it out. I would assume wires are run near the bottom left.

IDK would have to see it. lm386 not seated properly under the wifi board holding the wifi up, thus holding up the screen housing and screen??? just a guess.

Title: Re: lcd pressure problem
Post by: atomicareprise on April 22, 2010, 11:13:45 AM

nope my lcd seated on the cage nicely..

and i don't have wires running underneath them..

Title: Re: lcd pressure problem
Post by: loboplayero on April 25, 2010, 08:14:56 PM

is it an original psp case? cuz the same thing is happening to me but with a non official sony psp case yellow but when i try with original grey stock case it doesnt happen i notice it happens more when i press the buttons around the home bar it makes the screen funny when buttons are pressed.

Title: Re: lcd pressure problem
Post by: atomicareprise on April 26, 2010, 07:42:21 PM

its an oem case..when i took it out from the cage its not acting up..

then when i put it in then start acting up