Acidmods
AcidMods Resources ----- ( These are helpful tools for modding ) => Pic Programmers and Programs => Topic started by: strpwnedulol on April 23, 2010, 07:58:11 AM
-
Well, I Have 2 or 3 X-Box 360 Charge and Play/Plug and Play/Play and Charge Kits and Was Wondering If I Could Use Those To Program My Chips (12f683-I/P, PIC16F84A-04/P, and PIC16F688-I/P-ND)...
For Ex: (In The Diagram(s) HERE (https://www.acidmods.com/forum/index.php/topic,22283.msg168866.html#msg168866) ) Instead Of Soldering The Programmer To A DB-9 Serial Connector, Solder It To The Leads On A Cable From One Of My Kits...
(I'm referring to something like this: CLICK HERE (http://www.gamermodz.com/Alpha-USB-Re-Programmable-XBOX-360-Wireless-Controller/productinfo/PROGRAPID/))
How Would I Do So? (What Leads Go Where?; Can It Work?; Will It Work With Any Programming Software?; ETC...)
Thanks in advance.
-Josh
EDIT: I Found A Schematic Of The PnC Cable: HERE (http://forums.xbox-scene.com/index.php?showtopic=555361&st=15&p=3707744&#entry3707744) But I Don't Know How To Read It/Understand It/Apply This Knowledge.
-
it is posible, on some devices some are allow ICP and some dont. have you ever programed these chips before?
The 12f683 is 8 pin and the other two are 16pin, what might I ask you are doing with them? the 16f84A I have only ever seen used for spitfire which is a dead end mod. the 16f688 is a newer chip but i have not seen it used on any xbox related projects.
-
I'm Not Sure About Actual Possibility.
But in Theory....
Also:
12f683 Chips = For R/F Controllers
16f688 Chips = For R/F Controllers Using The Schematics In The Attached PDF File ( I also attached the programmer shown in the PDF -( Rename The Picture To A Zip File... )- If you do not trust me or something then don't download it :eyebrow: )
16f84A Chips = for friends who complain about hard to reach controller buttons (they have small hands almost like a 10year old.)
-
Where is this programmer software. I would like to test it out. It shows a s Jpeg file
-
this looks like one awsome mod. I can do the play and charge programmer, but in doing so, you will no longer be able to use the play and charge function. I pmed you.
-
Nevermind. If I could read I would have noticed that the file needed to be changed to a zip file :wacko:
-
I pmed you.
I Replied.
Nevermind. If I could read I would have noticed that the file needed to be changed to a zip file :wacko:
Reading Does Help... :yess:
Post Merge: April 25, 2010, 02:32:41 PM
Tell Me If I'm Wrong, But Is The Info Correct In The Excel Table Here (http://www.megaupload.com/?d=GBLW8YQK) Correct?
Post Merge: April 26, 2010, 02:30:42 PM
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.blogcdn.com%2Fwww.diylife.com%2Fmedia%2F2008%2F02%2Fconceptualdiag.png&hash=a2daa0fb62ad5927cb1515faceb3129730523ac8)
i found this, and if im not mistaking the ICSPDAT and ICSPCLK go to the respectable DATA + and DATA - of the USB-cord/PnC-Cable and the + and The - Go To the Power And Ground Of The USB-Cord/PnC-Cable And then i dont know about the Vpp Maybe An External Battery???