Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: joshua03v on May 02, 2010, 12:54:01 PM
-
i took apart my psp to mod but then after i put ti back together
the power light and the charging light (green and yellow) got dimmer
is ther anyway i can fix it ?
thx :P
-
what mod have you done?
-
was attempting to do theleft and right trigger mod but i didn't have enough equipment so i just put it back together.
-
hmm..when doing that i havent got any issues like that..try checking the LEDs of it..
-
well i took apart the x ,o,triangle and sqaure board.
and today i took it apart again i found a sracth on one of the connection would tat be the problem?
-
hmm..i got no idea..maybe you can try to bridge it..
-
I would start by pressing on the led while it is on, take your finger nail and apply preassure to it. if it becomes brighter, add solder to each side to better the conection.
if that has n effect, try a new led, you may have damaged that one in the process.
if that dont work, check the supply voltage and forward voltage of the led to make sure those are being met.
-
I would start by pressing on the led while it is on, take your finger nail and apply preassure to it. if it becomes brighter, add solder to each side to better the conection.
if that has n effect, try a new led, you may have damaged that one in the process.
if that dont work, check the supply voltage and forward voltage of the led to make sure those are being met.
i have try pushin on the light but now its not even on anymore its ther a way tat i can get the replacement for the cable that connects to tat board?