Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: Khaos on May 04, 2010, 07:17:56 PM
-
Im trying to add an alternate X button to my controller so I can jetpack more easily (I use bumper jumper) I already have the button on I jest need to know where to solder the wires.
-
Good idea, thats easy. Just solder 2 wires from the + and - from the bumper to a small momentary push button.
-
wha? I need a diagram for the X button.
-
Ohhh, you want to wire it up to the factory x button? Or your going to add another x button.
-
I have a momentary push button and I want to wire it to the X button.
-
Im Interested In This Too, Can You Give A Diagram
-
Ok. so i make this video tutorial. Hope it helps you guys out :D
Xbox 360 Controller Extra (X) Button Mod
Required Stuff
Soldering Iron
Solder
Momentary Push Button
Wire 22-30
Video Tutorial
How to: Xbox 360 Controller Extra (X) Button Mod (http://www.youtube.com/watch?v=EVY-VYLoegs#normal)
Image
If u cant figure it out in the video lol..
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi592.photobucket.com%2Falbums%2Ftt8%2FMikemanx2%2Fxbox360xpad.jpg%3Ft%3D1273038514&hash=39d58ffc4263255abb20dfa24a4580deb363a1da)
-
love the tut gonna do this when i get odst
-
thanks for the tut. I can do the same for other buttons right? just scrape of a little black and solder.
-
i officially know how to do f00 f00's fps controller mod. this and wiring the analog to the contacts after moving it. and i am gonna do it.
-
THATS AWSOME!!!!!! I'M LAZY AND HAVE SHORT FINGERS!!!!! SWEET..... wait I dont have an xbox.... FAIL :(
-
I Can Do This To Any Ctrl Right Like, A Ps2 Right?
Just Cut The Trace And Solder The Wire's, And Add the Little Button, Correct?
-
yep.
-
Yeah u can do this for any of the xbox 360 buttons and as tooandrew sayed u can do this for anything like a ps2 controller to :)
-
Yeah u can do this for any of the xbox 360 buttons and as tooandrew sayed u can do this for anything like a ps2 controller to :)
Hi Mogler,
What about PS3 pads where they have a flex board??? I would be interested to see where all the ribbon connections lead for mapping out the PS3 buttons to add an extra left and right for Modern warefare - I have having to remove my hands from the sticks to switch to 40mm or call in a pavelow......
-
-snip-
-
hmmm i can see a issue with doing this with ps pads as the buttons work on a resistance system RDC would be better to answer this for ps pads....
as for 360 pads its easiest to do it on cg controllers as all u have to do is find the live (+) contact for you button of choice ie X in this thead and wire that to a tactile then the other side of the tactile to ground.....
with matrix you'll have to follow both sides of the X button...
thank RDC for these threads for cg pad (https://www.acidmods.com/forum/index.php/topic,34544.0.html)
for matrix pads (https://www.acidmods.com/forum/index.php/topic,34545.0.html)
for cg2 pads (https://www.acidmods.com/forum/index.php/topic,34543.0.html)
-
even though sony uses an analog type button for digital inputs, this will still work fine for those controllers. It will be more similar to matrix for hookup. for circle you would need the circle line and Rcommon.