Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: Bullet Pulse on May 14, 2010, 07:18:27 PM
-
Any suggestions?
-
any of the open source codes on this site..... there all just as cheap if you get your chips n components in the right place...... and they all work pretty well.... my current code of choice is flex rf or t0pfire...
-
If your looking to make one yourself then they all cost arround the same ammount. If your looking to purchase an already made one your best bet is to get somone on here to throw one together for you or you could just grab one off ebay.
-
as they have stated use flex if your giong to make it yourself. if your going to buy a RF controller, buy a viking from viking360.com
-
Where can I buy one that's pretty easy to install?
Can you give me a link?
-
Here is where you can find the Flex https://www.acidmods.com/forum/index.php/topic,35802.0.html (https://www.acidmods.com/forum/index.php/topic,35802.0.html)
The install is fairly easy
-
I thought Hazer said that they were sold out?
-
THis code is a freeware code which means that you program a pic chip with the code yourself and then install it.
-
If in the UK, there are a couple of good sellers on eBay at a low price.
The biggest problem with getting a code from here is whilst its cheaper in some ways, buying a programmer, and components works out far more expensive.
12F683s in the UK are rediculous on price so I'd stick with eBay, I get quite a few from there. Don't want to go advertising for anyone so PM me if you need details.