Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: hwaire on May 18, 2010, 12:38:24 PM
-
Hi im trying to do the rapidfire mod on my matrix wireless i have soldered the two wires on but the rapid fire button acts just like another trigger no rapid fire i have tried Gears of war and COD2 same thing no faster please help
-
Well with the mod your doing that is how it will work. Now if you would like it on a trigger I would recomend using a Pic chip. There are a bunch of open source codes that are able to be used on Pic chips here at the site. Please take the time to check out the time to look at our opensource section.
Located here:
Click here (https://www.acidmods.com/forum/index.php/board,389.0.html)
-
BOO if you soldered the two wires, and it just works like another trigger (single fire) then you either A have fully charged batteries and the PWM is firing too fast for the controller to recognise, or B you are not modding a matrix controller.
But seriously once you take the step into microcontrollers to preform the rapid fire you will be much better off as laxboy stated and provided a link to we have alot of freeware codes to choose from on this site.
-
Matts right once you step into micro controllers there is no coming back. Everything that you want is in them