Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: smithy141 on May 30, 2010, 10:00:53 AM
-
hi i followed an abxy light tutorial but had no luck as leds are always on wen controller is off, just wondering if anyone has another tutorial that shows me how to do it using a transistor, thanks
-
sounds like you using a cg2/ or a matrix if you could identify the controller type we will be able to help you better. here is a link on how to identify.
https://www.acidmods.com/forum/index.php/topic,24699.0.html (https://www.acidmods.com/forum/index.php/topic,24699.0.html)
-
i think its a matrix controller
-
ok well im not sure of the technical terms but your controller does not shut off like the cg. You should try a optocoupler to make a common ground so that when the controller is off the lights are off. im not sure if it would work on a matrix so some one else is gonna have to confirm it.
-
wire it like you would for cg, this wil make your leds shin at full brightness anyway. use an optocoupler as lax said to turn it off and on.
the only thing that needs to be changed is the + supply, which will go to the optocoupler now
-
Ok thanks for the answers, also where can i get an optocoupler
-
ebay, digikey, mouser etc
-
ok thanks is there a tut on how to hook it up?
-
https://www.acidmods.com/forum/index.php/topic,34805.0.html (https://www.acidmods.com/forum/index.php/topic,34805.0.html)
-
yep used a transistor works fine and now turns off thanks for the info.
-
what is a transistor? ive never used one before and is there a certain kind of transistor i have to use or just any?
-
I used a NPN 2N3904 transistor you can get them here http://www.phenoptix.com/shop/2n3904-transistor-to92-p-160.html (http://www.phenoptix.com/shop/2n3904-transistor-to92-p-160.html)
Post Merge: August 19, 2010, 08:07:06 AM
or ebay