Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: Thaiboy on June 19, 2010, 11:20:30 PM
-
So for some weird reason, my PSP LCD fades to black when I bump the back of the psp...
This youtube video I uploaded explains the rest...
PSP weird LCD Problem HELP!!! (http://www.youtube.com/watch?v=OKvMvzsBlkc&feature=youtube_gdata#normal)
Any suggestions as too how I can fix it or what's wrong?
Thanks...
-
My Psp Has The Same Problem..I Never Could Fix It.
-
make sure your ribbon cables are in correctly
-
I had the same problem. Its the display IC on the motherboard. One or more solder points on the IC are not making a good connection. A reflow of the board should fix the bad point.
-
Thanks for the help everyone. (Sorry for the long response. Had no access to internet for two weeks...) :D
Yeah, I'm 100 percent sure the LCD ribbons are connected properly.
Which part is the display IC? (Picture?) What is reflowing, and do I have to buy a machine to "reflow" the board?
-
Yeah you're gonna need some more tools and a relowing station to reflow the IC. It's pretty hard.
-
Oh ok. thanks...
Should I just get a new motherboard then?
-
Oh ok. thanks...
Should I just get a new motherboard then?
That's what I would reccomend.
Check this one out fast, it's dirt cheap.
http://cgi.ebay.com/Bricked-PSP-2000-Motherboard-/230498813201?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item35aaccc511 (http://cgi.ebay.com/Bricked-PSP-2000-Motherboard-/230498813201?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item35aaccc511)
-
Cool, Thanks! :D