Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: nEoVaLoR on July 14, 2010, 07:14:17 AM
-
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi28.tinypic.com%2F555c0m.jpg&hash=ced905445800410a656fb73a014485980a5f90d3)
I have a mic exactly like this except there are no wires just solder points.
How would I tell which one is positive and negative so I can install this in my slim?
-
Red=positive
Black= Negative
-
Red=positive
Black= Negative
Lax I should slap you. :boxed: Above the picture it says "there are no wires just solder points". lol :yess:
I put the text under the picture so noone else makes the same mistake.
-
ah lol my bad still early, ok uh that im not sure about i would say just solder to wires to it and run a current and use a multimeter to be safe.
-
Fudge I thought I might have to buy one. I'm gonna scan the forum and see if there is a way to do so without. Hopefully there is lol.
-
look at the picture red is on the left black is on the right. He answered your question, if there is any slapping to be done, thats my job.
-
look at the picture red is on the left black is on the right. He answered your question, if there is any slapping to be done, thats my job.
Ahh! I just realized this. I totally deserve to be slapped. The pads are different. I wasn't looking close enough. Someone slap me lol