Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => Topic started by: GroundControl2MT on July 15, 2010, 08:53:55 PM
-
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg682.imageshack.us%2Fimg682%2F5586%2F1001902j.jpg&hash=141ee78816e6a6cf0572c61d2d4dda9ddbcb5d52) (http://img682.imageshack.us/i/1001902j.jpg/)
This will work with the go only, through bluetooth connection
Now the only problem is I've got my controller open, and I'm in a little over my head, I think i can do it i just need help with the pinouts
Update: Got the pinout for the buttons
http://www.blogcdn.com/www.engadget.com/media/2007/04/bupoopridlarge_engadget_howto.jpg (http://www.blogcdn.com/www.engadget.com/media/2007/04/bupoopridlarge_engadget_howto.jpg)
Update 2: I found how to wire the analog stick, but im still not sure were each wire goes because its from a random guide
http://www.engadget.com/2006/10/10/how-to-analog-control-stick-for-your-sony-psp/ (http://www.engadget.com/2006/10/10/how-to-analog-control-stick-for-your-sony-psp/)
-
the way the pot works on the anoluge stick, I am not sure this is going to work. chad you got any ideas?
-
Ya reading up more on pot and I don't think it will work with it, however now i want to try and remove it all together and replace it with a razor x that's mounted on the controller case
update:
ok I have decided to ditch both analog sticks for psp nubs, the left stick should connect easy and im going to get a razor x board for the right one and mount both on the dualshock face plate, it should end up looking something like this
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg807.imageshack.us%2Fimg807%2F5419%2Fdualshock3.jpg&hash=f9096b14949454a010baa93d482ffc96bd81afa7) (http://img807.imageshack.us/i/dualshock3.jpg/)
Update: parts are all here, I should have it done soon if i can do it at all!