Acidmods

AcidMods Resources ----- ( These are helpful tools for modding ) => Pic Programmers and Programs => Topic started by: SpartanXx666xX on July 16, 2010, 10:22:36 PM

Title: Help with Programmer
Post by: SpartanXx666xX on July 16, 2010, 10:22:36 PM

guys i just bought a programmer at mcumall

http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=3141 (http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=3141)

but when i try using Hazers flex code i get an error says Received Data error.

I went through and saw that the Error is from the EEPROM Data.

Good at 0x2B04
Bad at 0x0000 --> EEPROM Data

any help would be appreciated

Title: Re: Help with Programmer
Post by: Modded Matt on July 17, 2010, 07:07:16 AM

what software r u using?

Title: Re: Help with Programmer
Post by: SpartanXx666xX on July 17, 2010, 09:48:41 AM

it comes with its own software. USB PIC Programmer. and it wont work with winpic800.

Also i get an error saying The programmer does not recognize the [12F683] processor continue anyway?

not sure why it cant recognize my chip....

have you used this programmer before matt?

Title: Re: Help with Programmer
Post by: Modded Matt on July 17, 2010, 01:38:47 PM

nope try picit. are you sure you have the chip in the correct location?

Title: Re: Help with Programmer
Post by: SpartanXx666xX on July 17, 2010, 07:54:16 PM

EDIT: i got it working now