Acidmods

AcidMods Resources ----- ( These are helpful tools for modding ) => Electronics Projects => Topic started by: xXORAnG3Xx on July 17, 2010, 01:42:17 AM

Title: Rapid fire Xbox 360 mod [Help]
Post by: xXORAnG3Xx on July 17, 2010, 01:42:17 AM

Ok so i have purchased this rapid fire chip for 10 bucks for my controller but i don't know if my controller is compatible with this mod.
The controller is from a xbox 360 elite and it does not have the resistor on the top of the mobo.. it's located at the bottom instead of the top..

So well am i out of luck?

Title: Re: Rapid fire Xbox 360 mod [Help]
Post by: rafaliyo86 on July 17, 2010, 03:27:45 AM

Hi

Do you have the diagrams of your kit? First you have to know wich controller do you have. Try with this:

https://www.acidmods.com/forum/index.php/topic,24699.0.html (https://www.acidmods.com/forum/index.php/topic,24699.0.html)

If is from a Xbox 360 elite maybe would be a CG controller.

Normally all kits works with all controller the only difference its the instalation. Talk with your seller he should give you the diagrams.

Hope this help you

Title: Re: Rapid fire Xbox 360 mod [Help]
Post by: xXORAnG3Xx on July 17, 2010, 04:38:33 AM

i have a CG controller.. and i found a video on how to wire it.. much thanks for the controller identification link! :tup:

Title: Re: Rapid fire Xbox 360 mod [Help]
Post by: rafaliyo86 on July 17, 2010, 04:47:19 AM

Ok, you are welcome. When you need help only ask. There is always someone who can help you  :hifive: