Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: DARk_ANGEL on July 20, 2010, 05:46:44 PM

Title: turtle beach to controller wire connection
Post by: DARk_ANGEL on July 20, 2010, 05:46:44 PM

i have th x1 turtle beach head set and while playing the part you connect to the control broke. can i cut the wires and connect them to the controllers motherboard? (the mic part) :dntknw:

Title: Re: turtle beach to controller wire connection
Post by: StoopidMunkee on July 24, 2010, 07:05:42 PM

definately but keep in mind you will lose the ability to:
-toggle on and off on mic.
-unplug
-volume control

i find not being able to unplug it will become a problem.

Title: Re: turtle beach to controller wire connection
Post by: GhoSt on July 25, 2010, 12:03:31 PM

you can buy new puck cables on ebay.

Title: Re: turtle beach to controller wire connection
Post by: DARk_ANGEL on July 25, 2010, 12:24:25 PM

i know i can buy another 1 i just wanted to do an project but ill just buy a new one thanx

Title: Re: turtle beach to controller wire connection
Post by: DubbedTheBeast on July 30, 2010, 11:23:19 PM

you can buy another audio plug from radio shack. also if you really wanted something to do  use the parts from your plug and use jumpers from them to wire directly to you controller. you could take the plug out of you controller to save the time of cutting an extra whole(aside from the ones you'll need to make for the switch and volume control) and not really need to spend any more than a few bucks for hardware.

Title: Re: turtle beach to controller wire connection
Post by: DARk_ANGEL on August 17, 2010, 11:15:00 PM

yea sounds good will try