Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: radddogg on August 01, 2010, 08:37:40 AM

Title: Best rapid fire mod for MW2?
Post by: radddogg on August 01, 2010, 08:37:40 AM: Hi,

I've done many controller mods over the last few years but stopped when they started patching them. I'm using my old COD:WAW 3 mode sleeper mod (akimbo/8 sps/20+sps) but this is patched on MW2, however I see people with uber fast FALs. Are they using something new that I haven't seen? What is the best mod available at the moment?

Thanks
Title: Re: Best rapid fire mod for MW2?
Post by: spurgurgle on August 02, 2010, 04:07:22 AM: topfire by topbuzz
or flew rf by hazer

are our 2 most recent codes...... try either of these they work fine on all of my games .....

find them both in the open source codes area in the forum
Title: Re: Best rapid fire mod for MW2?
Post by: eNeRGy on August 02, 2010, 10:17:05 AM: Quote from: spurgurgle on August 02, 2010, 04:07:22 AM
topfire by topbuzz
or flew rf by hazer

are our 2 most recent codes...... try either of these they work fine on all of my games .....

find them both in the open source codes area in the forum

Yea t0pfire of FLEX are arguably the best on this site.
Title: Re: Best rapid fire mod for MW2?
Post by: radddogg on August 02, 2010, 04:10:21 PM: Quote from: spurgurgle on August 02, 2010, 04:07:22 AM
topfire by topbuzz
or flew rf by hazer

are our 2 most recent codes...... try either of these they work fine on all of my games .....

find them both in the open source codes area in the forum
Cool thanks, I have some already coded chips from ebay with the now patched code on them, can I get a PIC(?) controller and recode them? I assume there are tutorials on her on how to do it?

Thanks guys, you're the best :hifive:
Title: Re: Best rapid fire mod for MW2?
Post by: Data Hacker on August 07, 2010, 04:43:33 PM: Quote from: radddogg on August 02, 2010, 04:10:21 PM
Cool thanks, I have some already coded chips from ebay with the now patched code on them, can I get a PIC(?) controller and recode them? I assume there are tutorials on her on how to do it?

Thanks guys, you're the best :hifive:

yes you can get a compatible PIC Programmer on ebay or make a simple one for only 12F683 chips and re-program them. i suggest you get a 8 pin socket so you can take out the chip and reprogram it whenever a new rapid fire code is released and put it back in without having to clean it or solder it back on. there are many tutorials on how to erase and program a chip and all you really have to do is connect it to your pc and get it to detect your programmer with the chip in it and press the erase button or program button on the app you use to program/erase them. the most popular program everyone uses is winpic (any version) or winpic800.