Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: sakobatoneko on August 12, 2010, 02:07:03 PM
-
I finished doing the led swap and the leds are soldered correctly, but when i turn it on the controller wont light up. When i plug it in using the charging cable they light up. why is that?
-
Maybe they need a higher voltage than the controller puts out. The charger makes it put out .5v higher than usual.
-
yeah i do need a higher voltage, problem is i cant find any.
-
i converted one of my controllers to a lithium ion battery with a slightly higher voltage.
https://www.acidmods.com/forum/index.php/topic,37126.0.html (https://www.acidmods.com/forum/index.php/topic,37126.0.html)
it's not exactly a tut but i give a good idea of how i did it. you would just have to sacrifice a plug and play battery pack to make it. it was pretty easy after i figured it out.
-
My controller is a CG2 and i cant seem to find any points to power up my leds.
-
try the mic power.
-
What point is it?
-
CG
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg440.imageshack.us%2Fimg440%2F3826%2Fflexrfcg.jpg&hash=1660e472064575654c6bb29757fe326152989c72)
Matrix
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg40.imageshack.us%2Fimg40%2F185%2Fflexrfmatrix.jpg&hash=2f3d681029113a05a265aa636de43ced6bc8ec98)
Use the power on these pics to see if they work. The top picture is the one that is hooked up to the mic power