Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: naaaSTY on September 21, 2010, 03:33:45 PM
-
Hi all, I'm new to forums so sorry if this has been posted before.
So yesterday I was switching psp cases and once I finished installing all the psp parts inside the new case and turned it on, there was sound but no picture.
Any solutions? Thank you so much!
-
Check and Double check the back light and the LCD screen cable, its probably loose and you need to ensure the connection to the motherboard. I doubt you have blown a fuse... if anyone mentions it.
-
The backlight is the screen itself, right?
I checked the LCD screen cable and it's secure. I've also tried using new LCD screens to see if they work, but no luck. Thanks anyways :/
Post Merge: September 21, 2010, 05:42:41 PM
I'd also like to mention that I can see a bit of the psp xmb under a really bright light titled at an angle.
-
sounds like the backlight isnt plugged in.
-
Is the backlight the skinny cable? If so, that is definitely plugged in.
-
your black light fuse on your psp mother board is blown....from what you have described. just bridge the fuse with some solder and it will be good as new :tup:
-
Cool, thanks! :)
Is there a tutorial on how to do this and where is the backlight fuse?
-
scroll down in the link. there is a photo
https://www.acidmods.com/forum/index.php?topic=20323.0 (https://www.acidmods.com/forum/index.php?topic=20323.0)
-
Thank you! What do you mean by 'bridging' the connection? Sorry, I'm a newb at these things. :S
-
solder a wire connecting the 2 ends of the fuse.... or put a glob of solder over the fuse so the sides are connected
-
Which method is easier? Also, just solder the backlight fuse, not the LB sound fuse?
-
the easiest way.... to me.... is to solder a wire connecting both ends of the fuse