Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: .:M@x!W:. on October 20, 2010, 07:29:04 AM
-
I already led swapped the ms and wifi led on my psp slim but i wanted to change the power led to but it was a different led than the 0603 ones :S how do i swap the powerled?
-
I'm sure there is a Tut around here for it. You have three options. Buy a two color LED like it, tin and solder two leds to the 3 contact points or only solder one LED.
Its been so long, but after you desolder the existing led there would be three contacts. Use a meter here because I'm going off my memory and I'm old..... I think the middle pin was ground and the lower pin was Power (Green) and the top most pin was Orange (Charge)
If your going the SMD route know that the contact points are small, REMEMBER to TIN! :#1:
-
Thanks for replying nic0 u made some amazing mods :) and i'll TIN