Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: whitetop on November 01, 2010, 11:05:14 AM

Title: Internal Battery matrix
Post by: whitetop on November 01, 2010, 11:05:14 AM: hi

does anyone know were to solder on the matrix pad for the Internal Battery mod i have the charger and battery but on phantoms pics they don't show much on the pin outs.
Title: Re: Internal Battery matrix
Post by: Phantom on November 01, 2010, 04:34:51 PM: You just need to solder the wires from your new battery to the + and - where the battery springs connect to the controller
Title: Re: Internal Battery matrix
Post by: whitetop on November 01, 2010, 04:39:08 PM: but will that work with the mini usb when installed so i can charge it
Title: Re: Internal Battery matrix
Post by: Phantom on November 01, 2010, 04:44:48 PM: yep, if you connect the output of your charger to that battery
Title: Re: Internal Battery matrix
Post by: whitetop on November 01, 2010, 04:50:30 PM: how would that go then cos i dont know the pinouts of this l0rdnic0 is gona look out for the help i need but if i had the pinouts for the usb to the charger mb to the pad mb
Title: Re: Internal Battery matrix
Post by: Phantom on November 01, 2010, 05:03:17 PM: You connect your battery to the + and - on the mobo, then the wires coming from your charger go to those points as well, so you will have the battery and your charger connected to the 2 same points.