Acidmods
AcidMods Resources ----- ( These are helpful tools for modding ) => Open Source Code & AcidMods Free Code => Topic started by: Famas on January 13, 2011, 03:52:33 PM
-
Hello acidmods im posting this on behalf of robbo3 this is his new code for 2011 theres 2 things this does its the same install as all his other jitter codes heres a picture cg only here is a video of the code in action theres 1 thing i want from you 1 bug reporting etc
any problems contact me this is robbo wish people id like to thank
robbo for making this fine code
frenulem for the acidmods video intro
and last but not least hyper999 for his intrest and encouragement
thanks guy
robbo 3 mode jitter code acidmods.com (http://www.youtube.com/watch?v=tEw7OAzfKmg#)
modes are
1 jitter (adjustable)
2 dual wield (adjustable)
and 3 standard rapid fire (adjustable)
once controller is powered up is lt and sync to turn on and then to adjust fire rate select mode desered to alter them pres rt + sync you are now in programming mode 1 press on the right trigger is + 1 sps and 1 left is -1 sps the sync button is 0.1 sps once you increment the 0.1 to 0.9 + it goes back to 0 once controller is powered on and you have pressed lt+ sync to change mode it is just 1 tap of the sync button thankyou
-
Nice Robbos codes are always so much fun
-
yea i no good look fitting it
-
nice work its working very well thanks famas for posting it and a big thanks for robbo for making it.
-
no probs lovey enjoy it dude it great for black ops post speed result for everyone else please
-
What were the speeds used in the video? I want to know the speed used for the jitter mode
-
let me check 1 min just jitter or the fal speed aswell
-
let me check 1 min just jitter or the fal speed aswell
I always used 8.9sps for the fal but the one in the video was obviously much faster than that lol. Ill take all the speeds used in the video please :D
-
mode 1 10 main flashes 0 fast flashes
mode 2 8 main flashes 6-7 fast flashes
mode 3 21 main flashes 2 fast flashes
good luck post result please
-
mode 1 10 main flashes 0 fast flashes
mode 2 8 main flashes 6-7 fast flashes
mode 3 21 main flashes 2 fast flashes
good luck post result please
ok will do. itll have to wait untill later saturday though cause i got work
-
just wondering how you got on
-
just wondering how you got on
??? what?
I put the settings to what you said they were in the video and got results nothings close to the video.
-
so what did you try it with fal was with rapid fire and this pistols where with jitter and dual akimbo mode
-
so what did you try it with fal was with rapid fire and this pistols where with jitter and dual akimbo mode
well the akimbo and regular were closer to the video than the jitter. the jitter still seems way off. it gets off the first 3 shots than everytime it swithces it gets off 1 shot and swithces weapons again.
-
??? what?
I put the settings to what you said they were in the video and got results nothings close to the video.
I fitted this RF to a controller yesterday and tried it out with the settings Famas posted earlier... I'd say with my controller it works, as near as I can tell, identically to how it does in the vid :dntknw:
This is the first time I've tried out a 'jitter mod'. I have to agree with others who've said it, that for me it's more of a 'LOL at that!', novelty mod than anything else.
Huge thanks to Robbo for developing (and sharing!) the code, also to Famas for his involvement :hifive:
-
hello deek and welcome to acidmods im just wondering if you could do a little more adjusting on blackops and find the best speed for the fal please or is my settting ok ?
-
Hi and thanks ;)
Yeah sure I'll have a play around this evening after work and report back..
Post Merge: January 19, 2011, 05:13:05 AM
I can confirm, for me, your settings of 8.6/ 8.7 for the FAL work the best.. I use 8.7 for the FAL with FLEX rf too, iirc the shot cap for the FAL is at 9sps. I did run FLEX at 8.9 for a while but would still get the occasional lock up, so I knocked it back a couple as I'd far rather have reliability than the extra .2sps :yess:
Btw have you guys seen this gun stats chart?
http://denkirson.proboards.com/index.cgi?board=general&action=display&thread=2097 (http://denkirson.proboards.com/index.cgi?board=general&action=display&thread=2097)
The info on it is extracted from the pc version game files. It has firetime and rounds per minute info for all the guns.
-
this is my first jitter so im loving and it was really easy to installed.great job ROBBO
-
does anyone know were i can get the other controller picture from... many thanks...
-
hi this code is only made for a cg pad sorry someone found a way to make it work for matrix but i dont no how sorry my friend
-
thanks for the reply! if you find a way let me know...
-
if you have a matrix pad let me suggest putting a different rapid fire setup in like flex maybe
-
thought i would add this diagram that i just used/made for the CG2 controllers
as the details were not all in the same place !!
it includes the opto coupler, and all the points are on the top which made it much easier to install test etc ..
you can use either side LED of course, and either side trigger for the power/earth for opto :)
hope it helps some1 :)
Also added the matrix diagram that i made/used too as people dont seem to be able to search or find my other posts about it !
-
hey thanks dude that really really helped pm me the pics and ill put it in the main post really thanks alot
-
gadget thanks for posting that but just out of curiosity where is the y solder point for the matrix? The cg2 is under the dpad is the matrix on the back of the board?
-
you will need extra components for this to work on a matrix pad, better off stickking with CGs
-
gadget thanks for posting that but just out of curiosity where is the y solder point for the matrix? The cg2 is under the dpad is the matrix on the back of the board?
do you not understand the diagram i posted for the matrix ? it has both the locations for the Y contact !!
as on the matrix you have to join the two labeled points together (you cannot give the contact(s) a + or a -, they need to be joined, which is why you need a seperate device/componant to do this for you.. hence the extra componant in the diagram !
so thats why its ALOT easyier to use/install jitter mods on CG/CG2 controllers
(i only did it on this matrix, one for the challenge, and two its what i had about, so cost was low :)
-
got it thanks
-
hello to all and foremost thank you for this new mod I wanted to know if mounting above and valid for my CG and CG2
also like to know if the brown wire must be in the hole to weld, or if there is a little scratch for welding wire
thank you for your reply :psp:
-
hello yes it will work for cg and cg2 but the cg2 y trace will be different to the one in the picture and you dont weld you solder just to be clear if the wire is kynar 30 awg it should be stripped and pushed in the hole that would work fine
-
it is possible to create a collage or do not Photocoupler and where he should not to scratch the PCB for cg2?
-
say what? LOL
-
im trying to help here if you want to scratch the pcb buy a fiber glass pen i bought 1 today and they great for jobs like this please dont hesitate to contact me and ill be happy to help you find the y trace on a cg2 if you dont no what we are talking about im sure you could sendyour controller to a modder on this forum to help you out
-
can you not see the diagrams in my last post they are the CG2 ones lecrack65 !
(Famas maybe confused you by saying what he said ? as the diagram/pic in the first post is for CG, and the one in my post is the one for CG2 (and cannot just poke it into the via on the CG2 as they are filled up)
the diagrams i posted has everything you need for the CG2 ! thats why i posted them !
the opto points, and the Y point !!
and if you are asking how to solder onto the Y point then you should not be attempting it in my opinion !!
(but yes just scrape the protective paint off to see the copper and solder to that its simple common sense)
-
i was wondering what is MC74HC4053A, is that some sort of chip thing i have to get and do i have to program it, and what about the optocoupler, do i have to buy that to and do i have to program it, what do these chips do and could somebody post a link to where i could buy them and is the cg2 the new wireless d-pad controller that microsoft just released, it comes bundled with the slim
-
they cg2 was going long before the slim 360 as i have 1 from a year or so ago you will need a transistor for the chip to shut off ive not looked at the pictures but i think you can use n2222 but im not 100 percent and with the opto coupler its just a diode so no need to program it and for the chip you need to program the 12f683 the chip used originally but as for the other chip no i dont think so good luck will look for pics
-
the MC74HC4053A was used in order to make this work on a matrix board if you are using a CG or CG2 you do not need one
-
i have both types of controllers matrix, cg, and the new 360 d-pad controllerhttp://www.engadget.com/2010/08/31/new-xbox-360-controller-with-improved-d-pad-confirmed-by-major-n/ (http://www.engadget.com/2010/08/31/new-xbox-360-controller-with-improved-d-pad-confirmed-by-major-n/), i am just wondering what do i require for both the controllers, i already have the pic12f683, all the resistors, 1N4148 , i just need to know do i need the other stuff like a optocouplor, is this one good: http://cgi.ebay.ca/20-pcs-SFH620AA-Optocoupler-AC-Input-Optoisolator-/110479348702?pt=LH_DefaultDomain_0&hash=item19b91513de (http://cgi.ebay.ca/20-pcs-SFH620AA-Optocoupler-AC-Input-Optoisolator-/110479348702?pt=LH_DefaultDomain_0&hash=item19b91513de) and what about the other chip, MC74HC4053A, where do i get that, is searched ebay and couldn't find any, where can i get some and is the new controller cg3 maybe, it looks like a cg2 but the microsoft logo is placed in a different spot
Post Merge: January 30, 2011, 07:01:42 PM
i was wondering what is the best rapidfire code, and is using a jitter mod harder to install because the pictures look complicated, isn't there a jitter mod where i just install the pic12f683, some resistors and some diodes or does jitter require you to install 74HC4053 chip or a optocouplor
-
if you want to install it on a cg, follow the diagram in the first post, you dont need anything extra.
if you want to install it on a cg2, you will need an optocoupler. the controller with the new dpad has a cg2 board.
if you want to install it on a matrix, you will need that MC74HC4053A thing, which is apparently out of a dvd player, idk anything bout it
the best rapid fire code in my opinion is flex.
-
why do u think flex is the best, what are the difference, Thanks a lot guys for helping me out
-
https://www.acidmods.com/forum/index.php/topic,35802.0.html (https://www.acidmods.com/forum/index.php/topic,35802.0.html)
Compare them yourself
-
well i think this code is the best just because i used it on black ops and it was fine flex is "what you see is what you get" great code but in my opinion hard to learn how to use this code is the only code that will fire the g11 in blackops fully auto if you want it for dual akimbo will do that also and standard rapid fire if you want a break down mate here it is
durability 9/10 (its fully adjustable)
ease of use 9/10 (flex is about a 3 as it took me about a day to figuire out how to use it)
ease of install 9/10 (flex you have to drill a hole but on the other hand no resistors or diodes so hazer i really respect you for doing that mate
so a break down if you want to keep it simple on the soldering etc
use either this code burn me up witch will need editing to work on black ops or crazy modders six mode code please dont hesitate to contact me if any problems arise as im here to help and i no how hard the barrier is between people telling you things you dont quite understand the meaning of so any problems just post in this thread or a pm
-
i want to use the sync button for the rapidfire mode change and not buttons, the pictures for the flex install don't show me this, could i install it like the robbo mod and use flex's code
-
simple answer cant be done flex requires a button
Post Merge: January 31, 2011, 05:03:56 AM
read my post before this
-
so what is the best rapidfire mod i can use by tapping the sinc and is easy to install on all controllers
-
without jitter its probably CrazyModder's six mode
or with jitter its this one
crazy's is not customizable but its very good I've used it myself, it uses the sync button but I couldn't compare it with this as they both fulfil different purposes.