Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: mhgg on March 12, 2011, 07:36:29 PM

Title: some progress with jitter mod but still need some answers and help
Post by: mhgg on March 12, 2011, 07:36:29 PM

Ok guys i just finished a pic programmer that i made the one i made was from gameron or someone like that and i now need to know how to use it do i just download a hex file and then load it up and it does it automatically or do i need to download some other software then download the hex file and upload it to that program or what and  one thing i really need to know to make sure i built my programmer right is l< means ground right? if not i need to know asap  :beg: thanks for the help guys i really appreciate it  :victory:

Title: Re: some progress with jitter mod but still need some answers and help
Post by: drummerdude on March 12, 2011, 08:48:21 PM

You need a software to load the hex codes and program the chip. You can use Winpic800 since its free. I use micropro cause it came with my programmer though. I think you can download winpic at www.winpic800.com

Title: Re: some progress with jitter mod but still need some answers and help
Post by: mhgg on March 13, 2011, 08:24:30 AM

thanks i will check that out hope it works for windows 7