Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: drummerdude on March 14, 2011, 06:52:59 PM
-
So im workin on the controller redisgn, and im pretty much done untill i tested it. When I made it, i byaccident took off the wrong trigger so i had both taken off. When I tested it, the right trigger is always going off and it doesn't work. The anolog stick works untill when you click it the controller turns off. I'm not sure whats wrong. Even though it doesn't work properly, it sure does look darn good when its all closed up.
-
hmmmm, well the trigger problem???
could be when you put them back on they weren't bedded properly, so try re- heating the 3 pins and pushing it on better, if that fails steal another pot out of another pad and try that....
the anolog issue sounds like it is shorting out when u push the click in, so ur best bet with that is take it off and bed it in again
-
Ill give it a try
-
sounds like your top and middle pin are shorting.
-
ive worked on the controller like all last night... Im almost done with the case. Ive put a ps2 d-pad on it. I painted it this morning. All i have to do is just put some sort of calcking stuff in the small gaps. Im gonna fix the controller mobo most likely later today by just stealing some triggers and anolog sticks from a broken mobo. Sorry for the bad pic, i couldnt find my other camera, so i used a bad one and edited the size on an editing website. I think this project is gonna turn together soon.