Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PS3 => Topic started by: Adeo on April 04, 2011, 08:34:46 AM
-
Can you help me fix my ps3 controller? i puted led in tp12 and battery power points. and my ds3 is dead... When I put baterry harder (? my eng....) works but i must push the battery... anyone can help me?
-
sounds like when you were soldering to the negative battery pin you moved it out of place or perhaps bent it out of place when re-connecting the battery...
-
if it works if you push down on your battery you have taken solder off the battery pins when you soldered the wire to them
and please keep this in the other thread.
-
I must sold my battery pin.? That sound easy but i wil not doing this... I think i go to enginner... My skills in that are <0 xD
-
its ok some ones got to start some were hope you get it sorted out.
-
First remove whatever you did to it and see how it works.
Then make sure you are not missing the small piece of black foam that sits in the bracket that is in the top part of the shell. If it is missing the Daughter board does not make good contact with the main board and none of the buttons will work right.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi50.photobucket.com%2Falbums%2Ff320%2FRDCXBG%2FPS3%2520Six-Axis%2520and%2520DS3%2FMSU_35X112Daughterboard2.jpg&hash=3f928ff65f2452b9351454ef6d49a137e783bd10)