Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: Suprmacdaddy on April 07, 2011, 07:06:40 PM

Title: T0pfire wont work right, Help?
Post by: Suprmacdaddy on April 07, 2011, 07:06:40 PM

well i have it wired up right and i can press the left tact and the left trigger will work fine, and i can press the right tact and the right trigger works like its supposed to, but when i have both for dual trigger rapid fire the thumbsticks mess up and start moving towards the bottom right and ill turn off one of the triggers and it will be fine,
Any one have this problem or a solution?

Title: Re: T0pfire wont work right, Help?
Post by: Rodent on April 07, 2011, 07:11:37 PM

did you double check everything? all your solder points, make sure they are connected right and that you have them on the right numbers of the chip?

Title: Re: T0pfire wont work right, Help?
Post by: Suprmacdaddy on April 07, 2011, 07:13:30 PM

yup everything is wired up right, but i cant figure out what the hell the thumbsticks are doing because none of the points are touching the thumbsticks points and it only happens when both tacts are on if only one is on its fine.

Title: Re: T0pfire wont work right, Help?
Post by: jrfhoutx on April 07, 2011, 08:08:31 PM

what type of controller? CG1/2, Matrix1/2?

Title: Re: T0pfire wont work right, Help?
Post by: hyper999 on April 08, 2011, 08:02:54 AM

did you use the middle pin for the trigger?

this sounds like the mod is messing with the analog line.

Title: Re: T0pfire wont work right, Help?
Post by: Modded Matt on April 10, 2011, 05:45:10 AM

this is a short, or bridged trigger pin