Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: eddieluu on May 28, 2011, 11:02:23 PM

Title: jtag
Post by: eddieluu on May 28, 2011, 11:02:23 PM

i am looking to jtag my 360 and want to know what i can do to jtag it using usb because none of my pc have printer port.
i am wondering can i use this to do it?
http://www.modchip.ca/store/product.php?productid=16683&cat=284&page=1 (ftp://www.modchip.ca/store/product.php?productid=16683&cat=284&page=1)

my 360 is a zephyper motherboard with dash 7371

Title: Re: jtag
Post by: FOOKz™ on May 29, 2011, 01:14:44 PM

Short answer is YES. But that is a hefty $42.75 price tag.

This is probably twice as fast as a printer port or serial port. i am not sure if you could dump the NAND through your serial port instead rather than the printer port. I am not quite sure.

Good luck with your install man.

Title: Re: jtag
Post by: eddieluu on May 29, 2011, 04:13:49 PM

i was looking at crazy tutorial for the jtag and it show that he is using a printer cable but i don't have any printer port. So my best choice is to use a usb to jtag my 360