Acidmods
AcidMods Resources ----- ( These are helpful tools for modding ) => Open Source Code & AcidMods Free Code => Topic started by: tempermodz on July 13, 2011, 11:26:15 PM
-
Has anyone tried making a hex code for just drop shot for the xbox or ps3 ?
Just a drop shot code for the pic12f683, the normal pic, if I wrote it wrong.
-
Has anyone tried making a hex code for just drop shot for the xbox or ps3 ?
Just a drop shot code for the pic12f683, the normal pic, if I wrote it wrong.
just wire up the b button to one leg of a tactile and the other to ground. You can also add the middle pin on the right trigger to that and put it on the same as the b button and it should hopefully work.
If not you could modify say the BMU3 opensource code and change the akimbo mode to a dropshot and set the rate to one and instead of wiring to the l trigger you could wire it up to the b button.
-
Noce, ima give it a try, thanks.. do you have diagrams showing witch points are for the b button on each controller?
-
just wire up the b button to one leg of a tactile and the other to ground. You can also add the middle pin on the right trigger to that and put it on the same as the b button and it should hopefully work.
If not you could modify say the BMU3 opensource code and change the akimbo mode to a dropshot and set the rate to one and instead of wiring to the l trigger you could wire it up to the b button.
Sorry to burst your bubble but...
1. Won't work.
2. BMU3's akimbo code does not automatically press the L trigger when you press the R trigger, so this will not work either. However It wouldn't be too difficult to edit it to make it automatically press the L trigger.
-
Sorry to burst your bubble but...
1. Won't work.
2. BMU3's akimbo code does not automatically press the L trigger when you press the R trigger, so this will not work either. However It wouldn't be too difficult to edit it to make it automatically press the L trigger.
I know, I was just giving some suggestions lol. And I now realize that the r trigger doesnt work when its grounded, if you ground the middle pin on the right trigger it does the same thing as the left trigger lol.
-
Anyone know how you make a quickscope button?
I have seen two options here, but the double pole switch is had to get and I don't know how to delay a something. Any one have any ideas
https://www.acidmods.com/forum/index.php/topic,39884.msg299430.html#msg299430
Also anyone know how to make it so you just press the tactile once and then it would drop you to the floor without holding it down?
-
So drop shot works with b and ground to the tactical button. Anyone know how could i install it on the ps3 controller ???
Also I pretty suck at coding, could anyone add drop shot to any of the open source codes ?
-
I am making one to join in with the topfire rapid fire mod and I should be coming out in the next month
also making a quickscope code
So you press the tactile and you shoot and B button at the same time :)
and about the ps3 guy look for the ps3 circuit diagrams and don't what ever you do try and scrap the button seen some idiot doing that on youtube.
-
So drop shot works with b and ground to the tactical button. Anyone know how could i install it on the ps3 controller ???
Also I pretty suck at coding, could anyone add drop shot to any of the open source codes ?
For a PS3 this can be done by connecting TP1 and the TP point for the square button to a tactile button.
-
Button-Appropriate Resistor- tactile - power +
it's very basic
-
Alright awesome, ill be watching for that quickscope. I duplicated the R thumnstick
to a tactical and it sure improved my sniping kills. But looking foward for your code.
Like exactlu what resistor?
-
isnt that cheating?
-
some mods are cheating lol. :cool:
-
i uno guess its up in the air hate those ass clowns who drop shot makes me wanna invite them over for tea so i can hit them in the nuts after
lol
-
That didn't quite make sense but this is what the forum is about and the drop shot mode is coming out this week :)
-
why i said its up in the air discussion
drop shot can be done by mastering a button sequence are people getting that lazy?
didnt mean to offend anyone
-
It's kinda hard and it's slightly different as you can still aim
-
Does anyone have a drop shot & jitter ps3 mod / code?
Would be willing to pay for one!
-
Does anyone have a drop shot & jitter ps3 mod / code?
Would be willing to pay for one!
Try the free code list ;)
https://www.acidmods.com/forum/index.php/topic,37478.0.html
-
That didn't quite make sense but this is what the forum is about and the drop shot mode is coming out this week :)
So, what about the promised drop shot mode?
-
Been kinda busy but I am working on it
-
Cewl.
Do we need a pic for this mod?
-
nevbox could i see the code you have worked on for this, since i am trying to do it right now
-
Not sure if anyone cares. But this community has been good to me. SO here is something you guys here wanted.
This is my Dropshot with auto get up hex. There should be Two modes with and without rapid fire.
12f683
Here you are.
http://www.mediafire.com/?coo1u0yseqs75on (http://www.mediafire.com/?coo1u0yseqs75on)
Pin 1 Power
Pin 2 LED
Pin 4 SYNC
Pin 5 B Button
Pin 7 RT trigger
Pin 8 Ground.
-
Not sure if anyone cares. But this community has been good to me. SO here is something you guys here wanted.
This is my Dropshot with auto get up hex. There should be Two modes with and without rapid fire.
12f683
Here you are.
http://www.mediafire.com/?coo1u0yseqs75on (http://www.mediafire.com/?coo1u0yseqs75on)
Pin 1 Power
Pin 2 LED
Pin 4 SYNC
Pin 5 B Button
Pin 7 RT trigger
Pin 8 Ground.
Do you have a video showing thsi works? this is pretty cool if you made youself... congrates but would like to see some proof of how it works
-
I just tried it on a cg2 board and it works, pull right trigger and you go into prone while your gun is firing rapidfire, when you release right trigger you automatically stand back up, the only weird thing ive found so far is that you need to wait a second when you turn the mod on, if you are to quick the controller disconnects when you press RT, other than that it is flawless. very nice work nycxbox
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi40.tinypic.com%2F29binm.jpg&hash=d917fb4915279b418e739643073299c19a4293b3)
-
Nice Work phantomz0.... good pic shows members how to install if they look closely :tup:
-
Yes, Most mods that are connected to PADs (ABXY PADS) have the tendency to extend the Sync push if you press sync to enable the mod and then press the RT right away - cause it also presses the B button pad - so the controller goes into sync mode. Best technique is to push the sync and release and say ONE to yourself (you only need to let it sit for less than .7 seconds) If you press sync and have the RT down (which again enables the B button too) or press it in less than 1 second after you pressed sync the controller will go into sync mode. Many mods with Drop shot, auto reload, jitter and such function like this. IF there is a trick to prevent this - I would love to know what it is -but I have yet to figure it out. I never had any issue with waiting less than 1 second after releasing SYNC before using a RF mode on a mod chip.
As for video proof. I don't think it is necessary - the install is super simple - the chips are reprogrammable, if you try it and don't like it you wasted 5 minutes of your life. If you tried it and like it - then I am glad you like my work. It is not set to the fastest rapid fire, but it should work on every COD game for must semi auto guns and the mode without rapid fire is great for you guys who use auto guns already.
ENJOY
-
Yes, Most mods that are connected to PADs (ABXY PADS) have the tendency to extend the Sync push if you press sync to enable the mod and then press the RT right away - cause it also presses the B button pad - so the controller goes into sync mode. Best technique is to push the sync and release and say ONE to yourself (you only need to let it sit for less than .7 seconds) If you press sync and have the RT down (which again enables the B button too) or press it in less than 1 second after you pressed sync the controller will go into sync mode. Many mods with Drop shot, auto reload, jitter and such function like this. IF there is a trick to prevent this - I would love to know what it is -but I have yet to figure it out. I never had any issue with waiting less than 1 second after releasing SYNC before using a RF mode on a mod chip.
As for video proof. I don't think it is necessary - the install is super simple - the chips are reprogrammable, if you try it and don't like it you wasted 5 minutes of your life. If you tried it and like it - then I am glad you like my work. It is not set to the fastest rapid fire, but it should work on every COD game for must semi auto guns and the mode without rapid fire is great for you guys who use auto guns already.
ENJOY
The only reason i asked for a video is so people could see a demonstration, of how it works... but thank you anyways for shareing your talent.
-
Installed this mod. It works fine.
How do you change modes?
Sync buttons turns the mod on/off.
I like the auto standing up feature.
Dropshot is nice, but not always needed.
It would be nice with one more mode: If LT is pressed then don't drop.
What do you think?
-
Its best to have drop Shot on a tact Butt so press it when needed
Or have Aim Disable So when Aim is Hold It will no Drop Shot
-
Yes i meant that. The aiming trigger LT.
Cancel dropshot when LT is pressed.
-
That is called Drop Shot with AIM DISABLE.. Many of the main mod makers do that. I personally don't think it is necessary, but everyone has their preference. I do not have an AIM disable code on my mod because I don't hook up the chip to the LT. The mod I shared with you guys here - it is very simple. If you want to disable drop shot you only need to press sync to turn it off. There are only 2 modes (With and Without Rapid fire) So LT aim disable is unnecessary here, but on a more comprehensive mod I can see the point.
If you want drop shot on a tact you don;t even need a mod. Let me give you guys a nice schematic that RDC shared with me on building Dropshot into any controller with a tact switch. I use this for my customer on hard coded mods that don't have a drop shot mode. What is great about this is it allows you to do a drop shot with the tact button when ever you want. IF you are using an automatic weapon, the gun will still fire as normal when you press the tact but it will drop. If you are using a semi auto weapon the tact will fire once and drop you but if you have ANY rapid fire mod enabled it will work with that mod and allow you to drop shot using rapid fire.
Here is a link to buy the 4066.
http://www.mouser.com/ProductDetail/Texas-Instruments/SN74LV4066AN/?qs=sGAEpiMZZMtxrAS98ir%252bs6Yg1tqWLu1bVp%2fTzCWw%2f6o%3d (http://www.mouser.com/ProductDetail/Texas-Instruments/SN74LV4066AN/?qs=sGAEpiMZZMtxrAS98ir%252bs6Yg1tqWLu1bVp%2fTzCWw%2f6o%3d)
Here is the Basic Diagram That RDC gave me.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi12.photobucket.com%2Falbums%2Fa234%2Fxboxscenephotos%2F40661does2.png&hash=518c4e3b7155f0b410a6487e5033784d1390490b)
Let me give you some hints on where to install it and how to install it.
On a Matrix - it will fit here. You will need to bend and cut the pins. I will see If I can find an install Diagram I did.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi12.photobucket.com%2Falbums%2Fa234%2Fxboxscenephotos%2Fmatrix.png&hash=96401e73877455d37640e66d5b6ec58ae8d8b160)
On a CG or CG install here.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi12.photobucket.com%2Falbums%2Fa234%2Fxboxscenephotos%2Fcg4066.png&hash=81ad5dff2249d5c66f1165289c5aafd4fe093689)
This is a pretty simple mod just requires some patience when soldering. I have done of a ton of them they work great.
RDC was kind enough to design me an all in one board to manufacture - I never did. I might do it though soon an offer these as easy install kits. I wanted to use Micro 4066 with a quick solder board. Here are the prototypes RDC designed for me.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi12.photobucket.com%2Falbums%2Fa234%2Fxboxscenephotos%2F40663dmode1.png&hash=9fb4e01032a0077e34dd83b8cb9f80437a666883)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi12.photobucket.com%2Falbums%2Fa234%2Fxboxscenephotos%2F40663dmode2.png&hash=934153af154c5b139b5cca84e6e651faa55044a0)
-
Nice work and alot of info ..good pics
-
Thats Funny Was working on the similar thing same concept heheh nycxbox Beat me to it :#1:
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi167.photobucket.com%2Falbums%2Fu136%2Fkingmike_001%2F4016_01.gif&hash=8a85690042814b727f1014f0bc0d320167f8e416)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi167.photobucket.com%2Falbums%2Fu136%2Fkingmike_001%2F4016-1.jpg&hash=3f27fbb3c62b290e4094cda0cff28f17c0bd7c3f)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi167.photobucket.com%2Falbums%2Fu136%2Fkingmike_001%2FP3060129.jpg&hash=887945b510f08baccbaf5c20e45cc402182f7e34)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi167.photobucket.com%2Falbums%2Fu136%2Fkingmike_001%2F4016.jpg&hash=a2036a987197d3bbd7ac7d487c0cf022ef30daae)
Also have Addon Boards that can be added to any rapidfire on the market and Give you
Dropshot on Tact Switch Working independently or with Rapidfire or QuickKnife Digrams Below. Rodent have few simple to play with Soon
He will right Review About it.
DropShot can work With rapidfire speed so if you have rapidfire On the gun will drop shot with Rapidfire when Tact is press if the Rapidfire is Off
Than The Gun will fire normal Fire rate when the tact is Press and Drop Shot.
Digrams Below
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi167.photobucket.com%2Falbums%2Fu136%2Fkingmike_001%2FQuicK_Knife.png&hash=86cd230a01a5f3d2131725568588003ffdb32249)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi167.photobucket.com%2Falbums%2Fu136%2Fkingmike_001%2FRaptorAddon-DropShotInstallation.jpg&hash=43c7dd0ef2820530bd7f2db0b117527ed1a7e533)
-
love it thanks very much doing my sons now
Not sure if anyone cares. But this community has been good to me. SO here is something you guys here wanted.
This is my Dropshot with auto get up hex. There should be Two modes with and without rapid fire.
12f683
Here you are.
http://www.mediafire.com/?coo1u0yseqs75on (http://www.mediafire.com/?coo1u0yseqs75on)
Pin 1 Power
Pin 2 LED
Pin 4 SYNC
Pin 5 B Button
Pin 7 RT trigger
Pin 8 Ground.
-
I just tested this drop shot, Its pretty legit ! I tried on MW2 with the revolver/magnum. The rapid fire is ultra fast with it. It would of been a bonus if it had another mode with just rapid fire not the drop shot. Still pretty legit tho. I wonder If its possible installing to chips, this drop shot & lets say the 3 mode from acid mods, and use that one with the tactical to turn it on/off and the drop shot of course with the sync. Just have one off when using the other mod. But It would be kind of confusing when playing. Also if both are on, maybe the controller will go crazy or damage the chips. Ima see what i can do, and try it out.
Or perhaps using acids original to fire with the tactical button, or any other just firing the second chip with just the rapid fire with a tactical.. I just confused myself here but i'll make it happen
-
hey guys, ive recently tried this code with TWO different curcuit boards and it does the same for both. it wont drop BUT if i remove my batterie pack it automatically drops ill post pics of my install later. ps does any 1 have the diagram for the matrix pcb?
-
hey guys, ive recently tried this code with TWO different curcuit boards and it does the same for both. it wont drop BUT if i remove my batterie pack it automatically drops ill post pics of my install later. ps does any 1 have the diagram for the matrix pcb?
THIS DOES NOT WORK ON MATRIX - ONLY CG.
You should use an optocoupler if possible for the install.
IF you are installing on a CG2 make sure you cycle back to off (as the mod will turn on once you put your batter pack in) so after you turn the controller on, cycle the mod back to off then start over should work fine.
Something wring with your install if this is not working for you on a CG or CG2
-
THIS DOES NOT WORK ON MATRIX - ONLY CG.
You should use an optocoupler if possible for the install.
IF you are installing on a CG2 make sure you cycle back to off (as the mod will turn on once you put your batter pack in) so after you turn the controller on, cycle the mod back to off then start over should work fine.
Something wring with your install if this is not working for you on a CG or CG2
im sorry to give you a hard time but refrase the second paragraph for me please
-
anyone have an install pic of this on a cg2?
-
Look at my post in this thread, I installed it on a cg2. Just have to take the battery pack out to turn it off when the controller is off. https://www.acidmods.com/forum/index.php/topic,39929.msg313231.html#msg313231 (https://www.acidmods.com/forum/index.php/topic,39929.msg313231.html#msg313231)
-
Look at my post in this thread, I installed it on a cg2. Just have to take the battery pack out to turn it off when the controller is off. https://www.acidmods.com/forum/index.php/topic,39929.msg313231.html#msg313231 (https://www.acidmods.com/forum/index.php/topic,39929.msg313231.html#msg313231)
pic is blurry
-
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi587.photobucket.com%2Falbums%2Fss313%2FSilvaaa_%2FIMAG0231.jpg&hash=091cbf49165e03ac284cf38f692adc13c1df3f11)
better?
-
Not sure if anyone cares. But this community has been good to me. SO here is something you guys here wanted.
This is my Dropshot with auto get up hex. There should be Two modes with and without rapid fire.
12f683
Here you are.
http://www.mediafire.com/?coo1u0yseqs75on (http://www.mediafire.com/?coo1u0yseqs75on)
Pin 1 Power
Pin 2 LED
Pin 4 SYNC
Pin 5 B Button
Pin 7 RT trigger
Pin 8 Ground.
Can anyone provide a schmetic to make this work for a matrix board. Only looking for the drop shot mod.
-
Theodor613,
There are two main reasons why this code will not work on a Matrix controller. The first is that the triggers operate backwards on a Matrix compared to a CG. So the mod would think that you were pulling the trigger when it was released and releasing the trigger when it was pulled. Second, the Matrix controllers you a "matrix" to connect all of the buttons. So trying to drive the "B" button like you would on a CG will make the controller register multiple button pushes from various buttons instead of just the "B".
If you want I can provide you with a hex file that will work on the Matrix, but at a minimum you would need to wire something like a 2N3906 transistor up to control the B button.
-
Hey that would be great! Would wiring this up be similar to the one in this post? And thanks for the info on the difference between the controller.
-
hi Ive installed this at work using the pic 12f683 datasheet and the pinouts given on a cg and I'm only getting one mode on or off when described i should have two how do i change modes ha ha :Tupi:
-
Can you explain how this 4066 mod works?
I assume button 1 and button 2 stands for B button and Right trigger.
If so, why do they have both 2 connections?
EDIT: nevermind, got it working.