Acidmods
AcidMods Resources ----- ( These are helpful tools for modding ) => Open Source Code & AcidMods Free Code => Topic started by: tempermodz on July 24, 2011, 12:34:51 PM
-
Has anyone tried daxsleeper ? To make your own rapid fire codes without coding, the program makes the coding for you. Well I've only done one and test out one. I did a 18 mode, but it didn't work. Plus it only blinked up to 10 blinks like a 10 mode, but it was for 18. I don't know if the program just doesn't work or I just made a mistake, has anyone tried it before ?
-
Lol yeah ive tried that crap. It doesnt work.
-
Yeah that sounded too Kool to be true lol. Well atleast I know now that is the program not me
-
if your talking about dagsleeper, i never had any problems with it when i used it.
-
all worked fine with me do a smaller code say 6 or 8 mode :tup:
-
Yeah, the 5 mode worked well, I guess the more with modes, jack up
-
hi im new at this and when i tried the dagsleeper on the cg2 controller it works but the led indication is messed up,its on when the rapid fire is off and when i change mods the led flashes then goes out,has any1 else had this problem or know if ive done something wrong?
-
Something is shorting on something else and if you used a tactile button make sure you insulate the board behind it.
EDIT: I have used it before and it works fine.
-
well at first thats what i thought so i checked and double checked and all was fine so i pulled the chip from the socket and put bmu in and that works fine so im puzzled and i just put it down to the program then when i saw this post and others dont have this prob it puzzled me more
-
weird
-
yeh i just dont know i use this on my matrix pad and it works fine so i just took it out my cg2 and and put double flex in instead and all is goood.lol
-
ok so its bugging me now has nobody but me had this problem?wtf is that all about?my wiring is good i pulled the chip put on bmu and that works ok ive used a new chip just in case and its still the same? i thought is was dagsleeper thats no good but it appears its only me that had this problem so any ideas peaple?
-
Well I am not sure, any consolation it is a pretty awful rapid fire.
-
to be honest apart from the led thing i thought it was pretty good the sps speeds are a little shall we say hopefull lol
but all in all not that bad,ive paid for worse lol.
-
You have probably paid for that code, you get a lot of ebay :censored: selling this code. Also I think crazymodders code runs on a similar set up take a look: https://www.acidmods.com/forum/index.php/topic,34641.0.html (https://www.acidmods.com/forum/index.php/topic,34641.0.html) (I think you are supposed to use different res but I remember just using the same ones .)
-
i think it was lol, ive tried that 6mode its pretty good but too many modes for me,im loving the flex code but counting those flashes gives me a headache when i change games lol thats why i liked the dagsleeper so much my controllers got external pic socket so i was just doing 2 and 3 modes set for what game im playing and 2 mins to reprogram for a different game when i change but the led thing bugged me too much and i had to take it out lol
-
Fair enough