Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: Luigus on July 29, 2011, 06:20:32 AM
-
hi guys!
Today my one of my friend gave me his broken xbox 360 Pro at school. It has HDMI port
he told me the DVD drive is broken, and he Dad? took it apart and like lost some of the parts.
The fans is missing aswell as the wind tunnel thingy, and the underside cover for the DVD drive...
So at home i plugged it in one red light flashed, and on the tv it said e75 error...
now ife read about this errors and want to know if i should take a shot at it to fix it, or just rip it apart for repair parts...
The DVD drive is a Phillips & Lite-on drive, the tray wont open when i press the eject button, but the laser goes on and it makes noise..
ife checked if its the av cable, and it wasnt that(tried with my working xbox's cable) and i still get the error with a HDMI cable..
what would i have to buy/do to fix this problem?
-
Network chip cold solder joint needs Reflowed
-
how would i go by doing this?? have no idea :eyebrow:
cant i just take the network chip off since im not gonna use this xbox online??
-
as far as I know you would need a heatgun to reflow the network chip
look up youtube for tuts
-
just reflow it with a heat gun. just like any other reflow. all you do is do like me and buy a cheap heat gun they work. and keep it about 6 inches away from the place you want to reflow and move it in circles around it. if it is plastic parts, capacitors around it. insulate them good. ;)
-
OH so thats how it works!!!
thanks for the help, will try it out tomorrow... Damn thing just got the 3 lights, i think im just gonna leave it there :cry2:
-
theres a couple ways to do it heres a few videos to help you out
http://m.youtube.com/#/watch?desktop_uri=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DcoMtQIvlN6E&v=coMtQIvlN6E&gl=US
http://m.youtube.com/#/watch?desktop_uri=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DMEvfBS6Tams&v=MEvfBS6Tams&gl=US
hopefully those help you out let us know how it goes
-
OH so thats how it works!!!
thanks for the help, will try it out tomorrow... Damn thing just got the 3 lights, i think im just gonna leave it there :cry2:
Good Morning Luigus, sorry I have been really busy lately , reflows and painting etc, don't give up I can help you just been busy should have some free time the next day or so.
If you do a search or check under crazy-modders reflow tut shown here ,read thru and watch vide you can do the same thing with a heat gun shows how to set up the motherboard also read all the way thru the thread
https://www.acidmods.com/forum/index.php/topic,37530.0.html
can search http://www.youtube.com/
also how to reflow xbox 360 or google how to reflow xbox 360
-
Ok will do.. Thanks blaze & rodent!
its going crazy this week, and next week im going for an omperation.. Soo its gonna sit in my room for a while :sadno:
Ill post here when i get the chance on how its going( probly over 2 weeks or so)
thanks again