Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: bigboss59400 on August 02, 2011, 10:35:49 AM

Title: rapid fire on cg2 ?
Post by: bigboss59400 on August 02, 2011, 10:35:49 AM

Hello,

I want to know if is it possible to have rapid fire on cg2 ? and which works on it ?
(Because I test a dag sleeper in CG and it doesnt work http://gueux-forum.net/index.php?showtopic=215179)

Thanks

Title: Re: rapid fire on cg2 ?
Post by: magic_man185 on August 02, 2011, 01:28:22 PM

Any rapidfire code that is compatible with the CG is compatible with the CG2.  The only difference between the two is that the CG2 does not have a switched power supply point that turns off with the controller.  Your options are install an optocoupler to switch the power, as outlined in the forum https://www.acidmods.com/forum/index.php/topic,34805.0.html (https://www.acidmods.com/forum/index.php/topic,34805.0.html), or just wire it the same as the CG and pull the battery pack when you turn off the controller.

Title: Re: rapid fire on cg2 ?
Post by: bigboss59400 on August 03, 2011, 02:55:22 AM

Thanks for your reply magic_man,

Quote

Any rapidfire code that is compatible with the CG is compatible with the CG2.

On acid mod maybe but on the link that I gave you not...

I will test final rapid fire of hazer because

Quote

I would just like to add that my final rapdifire design used this as well.

Thanks for the link, I thought fix that bug with a transistor however we can do that with a optocoupleur.