Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: manwinder on August 06, 2011, 07:31:24 PM
-
so i was having problems with my cg2 flex rapidfire mod. i reinstalled it with optocoupler and now the bottom right led stays on, and the rapidfire isn`t working, i also by-accident chipped off a little tiny chip near c9(bottom left of the controller). i took a similar small chip from another controller (the chip was near c76, this is beside the left analog stick, it is on the right). i tried powering the flex without the optocoupler, it didn`t work, i removed the tact switch and put a new one in and it didn`t work