Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: sevydagreat on September 19, 2011, 04:47:06 AM
-
About 1 hour ago I dropped my psp slim while it was hooked on the usb cable and now it won't link to the computer ( giving me the
" please wait" message).
To diagnose my symptoms I have tried the following:
1) Change usb cables and use alternate memory cards( doesn't work)
2) tried the usb cables and memory cards on a another psp ( works for that psp)
3) cleaned the usb connector heads,( still can't link)
4)taken the whole thing apart trying to see any loose connections or broken bits ( all seems to be in other)
5) reflashed firmware ( no go)
6) tried to toggle usb connections in recovery ( no go)
From the above I have concluded that I have blown the usb fuse.
What I need is a picture of the usb fuse so i can bridge it.
I have searched everywhere but the only images for psp usb fuses are the ones for psp 1000s.
Hopefully someone can help.
-
what version of psp 2000 do you have?
I may be able to find you the fuse.
-
Thankx for replying.
I have the v2 mother board, the one that is hackable using pandora
EDIT:
Anyluck finding it?
[mod]Please do not double post. If you need to add something else to your previous post, please modify your post and add on.[/mod]
-
ok well... pics arnt getting posted cuz photobucket wont let me upload them.
But the fuses are marked LB. There are 2 of them located near the USB Port. one is off to the side and the other is directly below.
Bridging both fuses shouldn't hurt anything.
-
Cheers for letting me know, hmmm time for the hard part of bridging it.
edit: Just realised I suck at soldering. I may have messed it up completely.
-
BY THE WAY" :beg: how to make usb mod w/led if i charging?? help me pls :beg: