Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: 3D0kassiah on September 26, 2011, 01:32:58 PM

Title: robbos jitter mod xbox
Post by: 3D0kassiah on September 26, 2011, 01:32:58 PM: well have you guys ever had a project where you know it can be done but somehow you just cant get it well robbos jitter mod is one of them lol
i maybe overlooking something but here we go

so i have a cg NOT cg2 and i tried to install robbos jitter mod i actually got it working on a cg2 with out the opto i would just remove the battery pack when not using

but heres my main problem
in the pic attached
those wires are they attached like that ? from 1 to 2 to 3?
and on the circle i labled 3 how the crap do i pass a wire thru that i tried 30 awg but it doesnt go thru and i suppose to scrap the green crap off then attach?

ok next question when i attach all wires except the point labeled 3 it sorta works like the jitter works but not really well im assuming the sps is to high and i assume i cant press RT +SYNC because i dont have that wire attach to edit the sps like it states in the info

i pretty much stumped

crap when i try to upload an image it says you file did not pass security checks or something lol
Title: Re: robbos jitter mod xbox
Post by: Rodent on September 26, 2011, 01:35:50 PM: wheres the pic? dont see a pic. other wise i might be able to help.

here saved pic from robbos jitter so people can see it better
you need to clean off the area where the brown wire goes near the start button or X button, to make this work, there is only one point on the board that the wire needs to go to . shown in pic below

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1123.photobucket.com%2Falbums%2Fl553%2FRodent360%2Frobbojitter.jpg&hash=55907478fc9cc78c5dac313d9d6f4848fba9b661)
heres the link https://www.acidmods.com/forum/index.php/topic,38335.0.html
Title: Re: robbos jitter mod xbox
Post by: Famas on October 01, 2011, 02:30:15 AM: the brown wire need's to be wired one single strand of wire to where the coloured line ends
Title: Re: robbos jitter mod xbox
Post by: 3D0kassiah on October 01, 2011, 06:38:30 AM: Quote from: Famas on October 01, 2011, 02:30:15 AM
the brown wire need's to be wired one single strand of wire to where the coloured line ends

dam it i attached 2 wires
i actually attached a wire from 1 to 0 and 2 to 0 lol it works but thats prolly why its not working right
now

well doesnt it matter if i attached 2 diff wires like the way i did in the pic?

also a patch affected the sps?
cant get nowhere close to the video
Title: Re: robbos jitter mod xbox
Post by: Rodent on October 01, 2011, 08:00:59 AM: Edokassiah I thought we talked about this that you only needed one wire? lol also thought you told me you had it working?
Title: Re: robbos jitter mod xbox
Post by: 3D0kassiah on October 01, 2011, 08:07:37 AM: lol ok yes i got it working but it shoots horrible
and from what i understand there all jitter modes?
only mode 3 works for jitter lol