Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: Anonamous on October 06, 2011, 07:44:52 AM

Title: Llama Acrylic Bevel Window Case Cuts
Post by: Anonamous on October 06, 2011, 07:44:52 AM

I was wondering if any would happen to know how I could do this because this is exactly what I have always wanted out of a case cut. Link (http://www.llamma.com/xbox360/)

In case the page in the link changes, here is what it has as of today and what I'm looking at.
[spoiler]These are screenshots
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fscreensnapr.com%2Fe%2FJHjmgE.png&hash=9011d57737bbc230e3f1430a3fb0df1eb64a1a5f)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fscreensnapr.com%2Fe%2Fikig29.png&hash=4d0822aa289ec14953701ac1770b66df9239afcb)[/spoiler]

Title: Re: Llama Acrylic Bevel Window Case Cuts
Post by: snowcolt17 on October 06, 2011, 11:55:05 AM

thought about doing a cool case mod.. still might.. but hand etching something into plexiglass and placing leds around the edges so it will shine through and hit the etching.. it says they used a cnc.. idk what kind of material it is.

[spoiler](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fhackedgadgets.com%2Fwp-content%2F2%2Fetched_plexi_glass_led_door_2.jpg&hash=ce68de147a2dc656c799f613273f9874fa667474)

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fmedia.techeblog.com%2Fimages%2Fglassetched_1.jpg&hash=7cd6dc54a0d8b178d9b5baab5829004165c7b73e)[/spoiler]

Title: Re: Llama Acrylic Bevel Window Case Cuts
Post by: hyper999 on October 06, 2011, 01:02:58 PM

with hardcore skills and a router... or a CNC router

Title: Re: Llama Acrylic Bevel Window Case Cuts
Post by: snowcolt17 on October 06, 2011, 01:21:24 PM

yup. cnc. if you know anyone that has one. or anyone in school. be helpful

Title: Re: Llama Acrylic Bevel Window Case Cuts
Post by: Hazer on October 06, 2011, 01:51:44 PM

CNC is best, but you can still do it by hand using carbon paper. Thats how I did my Wii.

Title: Re: Llama Acrylic Bevel Window Case Cuts
Post by: snowcolt17 on October 06, 2011, 03:38:45 PM

Quote from: Hazer on October 06, 2011, 01:51:44 PM

CNC is best, but you can still do it by hand using carbon paper. Thats how I did my Wii.

my friend runs a laser cnc at school.. lol. if you dont have access to a cnc. i would use a dremel.

Title: Re: Llama Acrylic Bevel Window Case Cuts
Post by: Anonamous on October 07, 2011, 08:28:54 AM

I figured I could use a router. As long as its a simple design it shouldnt be too hard I guess