Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: snowcolt17 on October 14, 2011, 08:53:48 PM
-
so i jtaged a 360.. matt helped me through most of it. and Rodent. and Anonamous.. thanks guys
i added the molex connector to the bottom of the board to add a fan. when i put the mobo back in. started rrod..
first it was 0102.
replaced the xclamps. worked. for a little while started freezing..
throw another error. i was getting e79. i figured that was from the jtag wiring
i reflowed today. the 0102 went away and gave me e71. so i built a new freeboot.bin..
now its 0022
ive reflowed the hana, gpu, and cpu.. :/.
any suggestions?
[mod]Fixed name for Anonamous :)[/mod]
-
reball?
-
thats what i was thinking.. i dont know anyone that does it for cheap. and i dont got the stuff :(
-
what does desoldering and taking off the molex do?
-
idk. i was thinking that might be problem. it started when i did that
-
i could be bending the board slightly and akwardly so the gpu isnt making good connections
-
what does desoldering and taking off the molex do?
this....flash an old copy of xbr to it, its in crazys files
-
Check your jtag solder connections too, make sure they arent shorting anything on J2D2, J1D2 or J2B1 that wires do not go to for the hack. I think I recall seeing in the Xenon hardware sheet that some of them connect to the cpu and gpu n crap like that (obviously the SMC too hen the name the SMC hack)
Oh and BTW, you spelt my name wrong lol.
[mod]Fixed name for Anonamous :)[/mod]
-
so i jtaged a 360.. matt helped me through most of it. and Rodent. and Anonamous.. thanks guys
i added the molex connector to the bottom of the board to add a fan. when i put the mobo back in. started rrod..
first it was 0102.
replaced the xclamps. worked. for a little while started freezing..
throw another error. i was getting e79. i figured that was from the jtag wiring
i reflowed today. the 0102 went away and gave me e71. so i built a new freeboot.bin..
now its 0022
ive reflowed the hana, gpu, and cpu.. :/.
any suggestions?
Fixed name for Anonamous :)
i was in a hurry.. you didnt fix matts to Modded Matt. you need demoted lol.
thanks. and i will matt..
-
We all know who matt is hes the
BOSS
-
i knew who i was talking about. lol..
but installed the old xbr for zephyr and it didnt boot.. now installing feeboot. hopefully something will work..
-
so is it definatly a software issue?
-
i reflashed and its working.. somewhat. it wont boot with a usb plugged in
-
ok so i did what matt said. and installed xbr. and it works.. if i boot with a usb plugged in. it will give me e71. unplug it and it works. if i boot with dvd drive hooked up. it gives me error 0022. unplug it and it works.. any ideas?
-
make a new freeboot image and reflash it
Like I said It dosnt seem to be a problem with the xbox, but with the programming. this is all bootleg homebrew. It has issues.
put the original nand back on it and try it.
-
make a new freeboot image and reflash it
Like I said It dosnt seem to be a problem with the xbox, but with the programming. this is all bootleg homebrew. It has issues.
put the original nand back on it and try it.
i have never had rrod issues from a bad flash on a jtag. Only issues were hardware issues.
-
about every third time mine boots it flashes rrod, usually a power cycle fixes it.
-
i will get the nand. and everything and do it on this computer. then use usb and flash back. i told rodent it was a bad flash.
i made a new freeboot image after i installed xbr.
-
today i took my jtag apart so i could do install the protection jumper to protect the efuses from an official update. once done i put it all back together and turned it on only to get a rrod then a e79 error.
I turned the xbox off, and back on, then it hung on the load screen, but no errors. I reset the xbox one more time and loaded perfectly.
-
today i took my jtag apart so i could do install the protection jumper to protect the efuses from an official update. once done i put it all back together and turned it on only to get a rrod then a e79 error.
I turned the xbox off, and back on, then it hung on the load screen, but no errors. I reset the xbox one more time and loaded perfectly.
yea i saw somewhere where you could remove a resistor and bridge the point. might do it..
the aud_clamp wiring is supposed to keep it from e74..
after i installed xbr it doesnt rrod but..
if i have the dvd drive hooked up it will 0022. unplug it, it works. if i have a usb plugged in. e71. take it out. works.
thinking about starting all over. flashing the orginial nand. install xellous. then make the freeboot.
-
sorry your having so much trouble man. I cant get dashlaunch to work properly, it keeps booting to the nxe instead of freestyle. I changed the path correctly and everything....but I can launch FSD from xex.
now i have been having issues with storage space for my arcade backups because they can only be launched from a MS hdd or MS formatted usb space. Well with freestyle dash it will load up the games from any file path. I use xex to copy the content from the official hdd to a folder of choosing on my usb hdd and then set the file path correctly in FSD. only problem is I cant move the 20 gigs from the official partition on my usb hdd except through official ms means. so the stuff on there I have to move back to the official hdd to convert the file over then move them over to the usb hdd from xexmenu again.
lol its about data management. I just kinda winged it when setting up my jtag storage. I wish I would have gone all the way to freestyle dash then started organizing data.
anyway good luck to you man
-
no jtag is perfect. found that out. lol i thought after the hardware stuff easy. nope wrong. lol. i ordered a 360 hdd case for mine. and going to put a 250gb in it.
ive got some isos i backed up. and i got to convert them to god. then back to iso. then back to iso and extract them and works perfect. idk why so much converting.
for the arcade. either get a transfer cable or ftp into the m$ harddrive and get the live games... took this off another site may help ya
For anyone else who wants to play XBLA from external USB drive.
You have to create a folder called Content in the root and within Content create a folder called 0000000000000000 (16 0's) so it looks like this USB:\Content\0000000000000000\ download XM360 then use xexmenu or freestyle dash to run the XM360.xex then you should see them and be able to unlock everything and to play them.
-
all this jtag talk , and i havent even made one myself yet , guess thats going to have to happen now, you guys are just having way too much fun with your jtags :)
-
all this jtag talk , and i havent even made one myself yet , guess thats going to have to happen now, you guys are just having way too much fun with your jtags :)
hey im learning more and more about them :p. do it!
-
hey im learning more and more about them :p. do it!
Yes I know your learning, and you been doing great, and I will be making me a jtag when i get some free time.
-
so i was playing last night. and starts freezing. turn it on. 0022. i took it apart. and bolted it through the chassis. while i had it apart i added the molex and the fan molex thing. and soldered the sata cable to the bottom for a 3.5" hdd. now when it boots gives me 0102.. looks like i gotta reflow. but before i do i will unhook the sata and molex.. fml
heatgunned it. working. also didnt remove the molex cables or sata or hot glue on the bottom and its better tacked. :p. thanks though.