Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Xbox 360 Soft mods / JTAG support => Topic started by: Frosty on January 05, 2012, 06:29:00 AM
-
Have you guys every heard of a Lamprey board.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi.imgur.com%2Fb2iIJ.jpg&hash=9d750e422eab828cafb204a4d7c2c0ce24e97776)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi.imgur.com%2FFFAT7.jpg&hash=7bc6621a8e892c0609784dd08cbb4745286bc0ae)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi.imgur.com%2FXg5G3.jpg&hash=37a5e12ad1304d3344ba64b5832a1db400031b75)
NOTE:THESE ARE NOT MY PICTURES
If so could you explain what it is.Or give me a bit of info.
I found one for sale for 1,500.Want to know if it is worth it or not
-
Dont have a clue 25 cents you pay shipping :)
-
this is all i got
contains a vital piece of information which can, well basically convert a retail xbox 360 into a dev.
In theory, Yes! This allows you to take full control of all the fuses inside the xbox and resetting the motherboard to factory. From there, again.. in theory, you could transform boxes from retail to developer!
It does alot more then simple fuse control, for example every single engineer at microsoft has one as it is used to do full console diagnostics.
There are not very many documentations out there on everything it can do, and because they are so rare they have not been fully explored by the scene yet!
-
Thats very interesting indeed
Nice find m8
-
doesnt that mean u could set xbox back and jtag them?
-
Now these are the types of topics I like seeing posted. Even if I'll never know how to use one of these, the possibility of what it can do amuses me.
-
what it can do is unknown almost you can find very little.
These are supposed to be microsoft engineer only!!!!!!
Laxboy i believe it could it reset console back to factory default that is 1 thing i know.
-
I did some reading up on this and they say that it can also allow unsigned code to run and can perform full system diagnostics and might also be able to overclock the CPU and GPU
Interesting indeed
-
based on what's been said it's probably worth it
if you don't buy it, you should find someone like Rodent who would lol, i'm sure someone is interested
-
Link to sale ad?
-
doubt u can take back any console to jtaggable state due to after a certain update the fuses were blown and from my misunderstanding
its impossible to replace the fuses since they are inside the cpu
-
doubt u can take back any console to jtaggable state due to after a certain update the fuses were blown and from my misunderstanding
its impossible to replace the fuses since they are inside the cpu
ding ding ding!
It is possible to prevent the efuses from blowing by cutting certain pcb traces... but the kernel update will cause the console to RROD because the proper efuses were not blown.
-
this device takes controll of the fuses.
It just allows it to take i back to factory default where it can be turned into a dev kit.
There is extremely little information available but it still can be used for many uses.
Price of this little magic maker was set at $1500
i will contact the seller to see if he still has it if so i will let you all know.
-
there are leaked microsoft documents with more info about the board online, just google 'lamprey board' and you will find the rapidshare link
also, i thought dev kits have that side car thing that sits on top of the console with extra hardware inside? wouldnt all this be useless without that?
-
this turn an xbox into a dev kit xbox
the side is a bonus to a dev kit .
the same guythat is selling this also sells dev kit