Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Go => Topic started by: 1TONpete on January 30, 2012, 08:49:18 AM

Title: WIP M2 to MSPD adapter
Post by: 1TONpete on January 30, 2012, 08:49:18 AM

Just gathering info for now.
pinouts MSPD
http://pinouts.ru/Memory/memorysrick_pinout.shtml (http://pinouts.ru/Memory/memorysrick_pinout.shtml)
pinouts M2
http://pinoutsguide.com/Memory/memoty_stick_m2_pinout.shtml (http://pinoutsguide.com/Memory/memoty_stick_m2_pinout.shtml)
MSPD to dual micro sd adapter  . This is the infamous cr5400 .
http://www.dealextreme.com/p/photofast-cr-5400-dual-slot-sdhc-microsd-tf-to-ms-pro-duo-adapter-32gb-max-16489 (http://www.dealextreme.com/p/photofast-cr-5400-dual-slot-sdhc-microsd-tf-to-ms-pro-duo-adapter-32gb-max-16489)

Can we take one of these and reverse it ...
http://www.newegg.com/Product/Product.aspx?Item=9SIA0TJ07J1373 (http://www.newegg.com/Product/Product.aspx?Item=9SIA0TJ07J1373)

I wonder if the MSPD can be directly wired into the m2 slot. or buy a cheep m2 gut it and ribbon cable or board connect m2 to cr5400 directly.

I wonder if a micro sd can fit inside an m2 ...
(https://encrypted-tbn3.google.com/images?q=tbn:ANd9GcT4sDVLcjfH6aXfy48esfGRuG0vPPNYHRW8s0205-9GE8ZVwH-GtQ)



dev board for m2

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.hwtools.net%2Fjpg%2FM2EX_2.png&hash=bab75756ccf26890a0d8987e72344c194256bcd5) (http://www.hwtools.net/extenderboard/m2ex.html)

Title: Re: WIP M2 to MSPD adapter
Post by: hyper999 on January 30, 2012, 02:56:05 PM

I think you could just wire between m2 and mspd directly, they both have the same pins, just in different orders(wiring must accommodate this) and they are both Sony products so I would expect them to use the same data communication protocol :)

Title: Re: WIP M2 to MSPD adapter
Post by: 1TONpete on January 30, 2012, 04:41:52 PM

Hyper thanks, I was hoping you would see this.
Well here is what I got...
(https://www.acidmods.com/forum/MGalleryItem.php?id=2701)

Title: Re: WIP M2 to MSPD adapter
Post by: hyper999 on February 01, 2012, 07:02:38 AM

That looks good and all the VSS's would just be connected together

Title: Re: WIP M2 to MSPD adapter
Post by: 1TONpete on February 01, 2012, 07:51:57 AM

Thanks hyper any ideas on pins 10 and 11 on m2?

Title: Re: WIP M2 to MSPD adapter
Post by: hyper999 on February 02, 2012, 09:36:07 AM

Quote from: 1TONpete on February 01, 2012, 07:51:57 AM

Thanks hyper any ideas on pins 10 and 11 on m2?

reserved so that basically means not in use now but might be needed in the future if they made like "M2 superfast version" or something like that. you don't need to worry about them.