Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: stunned on February 21, 2012, 05:11:46 PM
-
So ive been putting leds on controllers for a while. but some controllers barely light up unless there is full batteries or a play-n-charge plugged in. I know the blue leds are the lowest in mcd or whatever its called. should I use a led with a brighter mcd or is there another way to make them brighter?
any help would be great
-
had the same problem. i think its bc the blues use more voltage even though the battery isnt dead it requires more power to power the leds..
-
when leds dont light to their full potential, they are not getting the needed forward voltage.
-
if the leds are controlled via the ground point, wouldn't it just be possible to find a higher voltage point for the positive?
-
if the leds are controlled via the ground point, wouldn't it just be possible to find a higher voltage point for the positive?
the AA batterys can only supply 3V, most blue LED's have 3.3v forward voltage
-
I try to get low v leds for rol swaps etc.
-
Alright ill have to try doin something. cause its getting annoying. thanks for the help guys
-
You can try using high v AA batteries . They sell high v rechargeable aa batteries . Search for NiZn made. By powergenix. They need their own charger.