Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: lakrulez14 on March 03, 2012, 02:15:18 PM
-
Well got this matrix motherboard controller that won't turn on but when turned on with power all the ring lights turn on, not blinking but constantly. I have a good feeling its a short but I really dnt wanna grab another motherboard. Mods on it are internal mic with volume control and mute switch, basic rapid fire (matrix board) and push activated leds in buttons. I check, re-check, and checked my wireing again but just can't seem 2 find out what I messed up on...thanks in advance
-
check all the rapid fire wiring. there is something you are over looking..
also if you cant find a short or bridge maybe undo the mods?.. starting with the rf, then the mic. testing after undoing the mods..
-
1st which Rapid Fire did you add to the matrix? Is it a Matrix 1 or the new Matrix 2 board , pic would help
need to give more info on exactly what you did and what you RF you used.
-
I disconnected all the mods, no luck still so I'm guessing its done...but its a matrix 1 board with the rapidfire hooked up 2 the rumble motor
Edit: Doesn't have a RF chip
[mod]Please do not double post[/mod]
[gmod]
you been warned[/gmod]
-
I disconnected all the mods, no luck still so I'm guessing its done...but its a matrix 1 board with the rapidfire hooked up 2 the rumble motor
Edit: Doesn't have a RF chip
[mod]Click modify to edit post do not double post[/mod]
you been warned
Well got this matrix motherboard controller that won't turn on but when turned on with power all the ring lights turn on, not blinking but constantly. I have a good feeling its a short but I really dnt wanna grab another motherboard. Mods on it are internal mic with volume control and mute switch, basic rapid fire (matrix board) and push activated leds in buttons. I check, re-check, and checked my wireing again but just can't seem 2 find out what I messed up on...thanks in advance
you said you had a rapid fire.
-
Well got this matrix motherboard controller that won't turn on but when turned on with power all the ring lights turn on, not blinking but constantly. I have a good feeling its a short but I really dnt wanna grab another motherboard. Mods on it are internal mic with volume control and mute switch, basic rapid fire (matrix board) and push activated leds in buttons. I check, re-check, and checked my wireing again but just can't seem 2 find out what I messed up on...thanks in advance
you said you had a rapid fire.
How can you say it doesnt have RF when in the first post you said it did
-
I disconnected all the mods, no luck still so I'm guessing its done...but its a matrix 1 board with the rapidfire hooked up 2 the rumble motor
Edit: Doesn't have a RF chip
rf hooked to the rumblers? do you have pics and where did you get this method?
-
if you guys are familiar with the no rf chip method where you hook a switch to the player led and then the rt, it makes it rapid fire. This method works the same with the rumble. like this...
right trigger-----momentary push button------rumble solder point
-
if you guys are familiar with the no rf chip method where you hook a switch to the player led and then the rt, it makes it rapid fire. This method works the same with the rumble. like this...
right trigger-----momentary push button------rumble solder point
that works on matrix?
-
that works on matrix?
Old Matrix board yes!
-
Sorry about the double post I'm using my cell phone...but yea I dnt have a RF chip just wired up to the rumble motor solder point and the trigger, sorry I thought u guys knew what I meant when I said basic RF with matrix board, my fault...thx 4 the help though
-
Well got this matrix motherboard controller that won't turn on but when turned on with power all the ring lights turn on, not blinking but constantly. I have a good feeling its a short but I really dnt wanna grab another motherboard. Mods on it are internal mic with volume control and mute switch, basic rapid fire (matrix board) and push activated leds in buttons. I check, re-check, and checked my wireing again but just can't seem 2 find out what I messed up on...thanks in advance
check the controller boards itself for a shot. It will likely be something obvious. If you were soldering something near the board sometimes solder can fall and cause shorts or little solder balls that come out of your cleaning sponge may stick to your board and cause shorts that will get hot and melt the solder. (has happened to my falcon RGH motherboard 6 times already lol.)