Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: 3D0kassiah on April 03, 2012, 04:44:55 AM

Title: matrix 2 controller vcc?
Post by: 3D0kassiah on April 03, 2012, 04:44:55 AM

i got ahold of a silver matrix 2 controller looks like i can install hazers flex rf but where can i grab power from any ideas?

Title: Re: matrix 2 controller vcc?
Post by: Modded Matt on April 03, 2012, 05:19:43 AM

its matrix, so you will need an opto, at which point you can pull from the battery for main power.

Title: Re: matrix 2 controller vcc?
Post by: 3D0kassiah on April 03, 2012, 05:35:16 AM

isnt the point of an opto is because matrix cg2 etc have an unswitched power source meaning itll turn on without hitting the dome correct?
can i still use the battery power withut an opto i always take the battery packs out when im done using it anyway so not really n issue

Title: Re: matrix 2 controller vcc?
Post by: RDC on April 27, 2012, 11:54:08 AM

The point of the OptoCoupler is to make a switched source, so it's on when the controller is on, off when it's off.

If you pull the batteries, then just use TP1 for the power on the Matrix2.